vermeer

  1. harp_landscaping

    CHIPPER W/ GRAPPLE LOADER WANTED!!!

    looking for a 15-20" chipper with around 200 HP. Chipper must have a loader/grapple. Preferably self-propelled (will settle for towable) with radio remote controll. contact Brandon @(724)979-2104
    • harp_landscaping
    • Thread
    • bandit chipper crane-fed chipper loader chipper loader grapple self-propelled towable vermeer
    • Replies: 5
    • Forum: TreeBay
  2. hammsarborcare

    Vermeer Chipper Review

    Hey guys we just uploaded a review of our favorite chipper! Thank you so much for our recent subscribers we are trying so hard with this Youtube channel :)
  3. D

    Help!!!

    I have an older vermeer 1000. Serial # 101. I have the drum out and I'm replacing the bearings. From what I can tell on a dial caliper and a tape measure the diameter of the shaft going through the drum is 2 3/16". Could someone give me re assurance. And any advice on bearing selection etc...any...
  4. M

    Advice: Vermeer S600TX drive control plunger leaks (joystick)

    Hi All, i just got started in mini-skid services and bought a Vermeer S600tx with low hours (500). Didn't notice when i tested it but the main drive control joystick leaks - appears to be the plungers letting Hyd. fluid pass by. Seal kit does not include anything to seal plungers, so...
  5. zmann

    Chipper blades, Vermeer 1800 Turbo or 1800 A. Non recessed blades

    We have 7 sets of sharp chipper blades. A couple have dings in them but are still useable. They were all sharpened by Vermeer. Asking $180 per set over 5” wide, $160 that are 5” and under. All 7 sets for $1000. I’m not sure what other chippers they may fit. Buyer pays shipping or picks up...
    • zmann
    • Thread
    • 1800 a 1800 turbo blades vermeer
    • Replies: 0
    • Forum: TreeBay
  6. Treetopflyer

    2001 Vermeer SC50tx Marlin technologies.

    I inherited a nice stump grinder a while ago. It's a wonderful beastly grinder that makes very short work of large tree graves as I like to call them for this story. One of the best stumper cutters ever made. Unfortunately with this gift came a whole list of things I'll spare you from hearing...
  7. Francois Gagnon

    zahn r300 reviews request!!

    alright zahn users time to get your reviews on your little articulated.... if you have info and pictures of the kind of wood you can lift fell free to share! I have the option to get one with dual urethane filled tires (adding 4x 92lbs of counterweight?) if anyone is having that setup how is it...
  8. Justin Parker

    (SOLD) Vermeer SC 372 Stump Grinder For Sale

    2011 Vermeer stump grinder in like new condition for sale. Two cutting wheels, both go with machine. Very low hours, 406 on meter. Yanmar diesel motor. $17,800. Located in southern Idaho. Please email if interested to justin@parkertreeservice.net or you can contact directly at...
  9. Belac

    Smallest Wood Chippers Review

    I'm looking for people's input on the smallest woodchippers available... gas powered; flail-wheel vs. drum; auto feed; towable behind a 2500hp pickup; able to handle some 6-8" material. Maybe I'm dreaming of something that doesn't exist.zzz
    • Belac
    • Thread
    • altec parts arborist bandit chipper equipment vermeer
    • Replies: 14
    • Forum: General Discussion
  10. A

    Considering a 95 Vermeer 1250 85hp Diesel. Thoughts?

    Hi guys, I'm looking for a cheap lesson. I'm considering purchasing a 1995 Vermeer 1250 85hp diesel. Does anyone have experience with this machine? It has a 12" capacity and has the side by side roller feed. From what I've read it has some design flaws but is a loyal machine. Its self feeding...
  11. B

    Vermeer 600XL chipper belt tightening ideas

    This spring I had 2 acres of bush cut down in order to clear an area to build a house. The trees were separated into a log pile and a very large and long pile of brush and branches. The cost to have them chipped was almost as much as I paid to buy a used 2009 Vermeer 600 XL chipper. So I bought...
  12. J

    1997 Brush Bandit Model 250XP w/ Hydraulic Winch & Hydraulic Chute

    Up for sale is a FRESH wood chipper. This baby just got overhauled with tons of new parts. Machine runs like brand new! Its got a Cummins 4BT and a brand new turbo. Clutch was just serviced. Auto feed, 12" capacity, pintle hitch, spare tire mounted on rim, new hydraulic hoses, sand blasted and...
    • jgew21
    • Thread
    • bandit bandit brush bandit brush bandit chipper cummins vermeer vermeer chipper wood chipper
    • Replies: 4
    • Forum: TreeBay
  13. U

    Vermeer Stump Grinder. Is the price the price?

    I got a dumb question. I'm moving up to bigger equipment and asked the local sales rep for a price on a sc292 and a sc362. He said $18k for the smaller 27hp and $22k for the 35hp. Now am I supposed to bargain with him the way you do at a car lot, or is the price the price the way it is if you...
  14. T

    Vermeer SC372 Operator presence system - nuisance!

    Hey y'all! I'm a new member to the forum, but a long time reader. I've used the forums on this site to help me figure things out when all other options were exhausted. I've avoided countless hours of headaches and frustration by doing a quick search for what I was having trouble with! With that...
    • thetreeremovalguy62
    • Thread
    • electical safety systems operator presence system sc372 stump cutter stump grinder stumpgrinder vermeer vermeer sc372 vermeer stump grinder
    • Replies: 6
    • Forum: General Discussion
  15. Vermeer BC1000XL

    Vermeer BC1000XL

    2006 Vermeer BC 1000 Chipper, 1,190 Hours, 85HP Cummins Diesel Engine
    • JTSpear
    • Media item
    • bc1000 bc1000xl chipper cummins diesel for sale vermeer vermont
    • Comments: 0
    • Category: Equipment
  16. Vermeer BC1000XL

    Vermeer BC1000XL

    2006 Vermeer BC 1000 Chipper, 1,190 Hours, 85HP Cummins Diesel Engine
    • JTSpear
    • Media item
    • bc1000 chipper cummins diesel for sale vermeer vermont
    • Comments: 0
    • Category: Equipment
  17. J

    Vermeer bc1000xl wood chipper

    A large y-shaped log jammed in the feed chute causing the unit to stall out. After using the jack to raise the feed wheel and removing the wood, upon restarting, the high gear won't engage. It'll low idle and the drum engages in low, but the feed wheel doesn't turn and, as I said, it won't idle...
  18. JTSpear

    Vermeer BC1000XL for sale.

    2006 Vermeer BC 1000 Chipper, 1,190 Hours, 85HP Cummins Diesel Engine, , Some Rust, autofeed works very well,Well Maintained, comes with extra knives. $13,750 Located in VT Call: 802-244-5100 PM me if interested. Vermeer BC1000XL by JTSpear posted Feb 24, 2016 at 9:47 PM Vermeer BC1000XL by...
    • JTSpear
    • Thread
    • chipper cummins diesel for sale vermeer vermont
    • Replies: 0
    • Forum: TreeBay
  19. bluebeecher

    Can you help diagnose whats wrong with my chipper?

    Hi Friends, A little while ago I bought a used Vermeer BC1000XL, 2005 with 2200 hours on it. It has the ford diesel engine (80hp or so) It was running fine but lately it won't stay at fast idle and cycles between slowing down and speeding back up when its in chipping mode. Also a day ago the...
  20. T

    2004 Vermeer 1230a disk chipper

    12 inch disk chipper Perkins Turbo Diesel 1600 hours Runs and works great. No title so "equipment in transit" plates required in NJ Contact Rory (609)290-0759
    • treeeguy
    • Thread
    • chipper diesel disk chipper perkins turbo diesel vermeer
    • Replies: 0
    • Forum: TreeBay

New threads New posts

Kask Stihl NORTHEASTERN Arborists Wesspur TreeStuff.com Teufelberger Westminster X-Rigging Teufelberger
Back
Top Bottom