Treetopflyer
Been here much more than a while
- Location
- Coastal N.J
It’s been windy around here and today was no exception, old english ivy covered red cedars got hammered last week or so and we got the call to bring them down safely
Today....
- Thread starter Mark Chisholm
- Start date
People! PLEASE be calling us to remove codominant stems before they become advanced issues. Grrrrr. Too many otherwise beautiful trees becoming liabilities.
Looking at those fibers and I can just hear it in my mind. Looks like the hotrod 500 is rippin’!
Treetopflyer
Been here much more than a while
- Location
- Coastal N.J
You’re so right Eric! That and the vines , please just cut them once in a while so they don’t engulf the whole tree at least! Lotta extra to carry in the wind !
Serf Life
Been here much more than a while
- Location
- Maine Island
Birch we cut a day prior, not super tasty sapcicle unfortunately.
Chauffeur headed out.
Chauffeur headed out.
No man is an island, but you’re the man on the island!
Matias
Been here much more than a while
- Location
- Butte County
Man, this really lit me up. I straight up forgot that this is also work, but I am so ecstatic to be doing it that it becomes easy to forget.
It’s proof that the intention behind something is the make or break factor. I’m right there with you…we are hopeful to begin a decent project here at our new place. It will be life changing in a good way for our family. That feeling gives me a great deal of energy, excitement, and motivation to boot.
What a cool way to get to the job!!! Not to mention a Beautiful Place!!
Serf Life
Been here much more than a while
- Location
- Maine Island
Our town is a beautiful one, over 200 islands and over 200 mi of coastline. We’ve been doing winter work on this 190ac. island for 5 yrs and generally have the whole place to ourselves. At height of land there used to be a sub-spotter tower from WW2.
Dan Thornton
Participating member
- Location
- Smithsburg
The chestnut tree roots are still living! Shoots grow and may get as much as ten-feet tall but die before maturity. I saw many of them on the Appalachian Trail. They used to say that a squirrel could jump from chestnut tree to chestnut tree from Tennessee to Vermont without touching the ground.
southsoundtree
Been here much more than a while
- Location
- Olympia, WA
Milled a bit -2 Oregon White Oak limbs, one spalted, one green, from a hazard removal project and some cedar 2x2s for deer fencing. 
Matias
Been here much more than a while
- Location
- Butte County
Those limbs are awesome!
southsoundtree
Been here much more than a while
- Location
- Olympia, WA
Now, what to do with them, before and after they dry?
Treemuel
Branched out member
- Location
- Hancock, ME
A few inches of snow yesterday turned into a couple more inches of rain over night, then back to below freezing early this morning. Turned into a beautiful day though after waking up to ice caked onto every surface. Had to use a blow drier to get the truck bins open.
Speedlining some limbs over a house on a fun white pine. And someone else is doing the cleanup Lot’s of folks cut trees around here, but not so many climb, so I get the benefit of picking up a lot of these no cleanup jobs.
Speedlining some limbs over a house on a fun white pine. And someone else is doing the cleanup Lot’s of folks cut trees around here, but not so many climb, so I get the benefit of picking up a lot of these no cleanup jobs.
Felled a crazy leaning Silver Maple today, angle pretty close to 45°. This was one of two that looked this way. Removed end weight and storm damaged limbs from one and felled the other. Shallow notch, plunge cut hinge to about 1", finished the back cut from the plunge.
Attachments
southsoundtree
Been here much more than a while
- Location
- Olympia, WA
This is my backyard.
Annual pruning for a customer and a sold another put on ground only job, this time for a dead hemlock.
Annual pruning for a customer and a sold another put on ground only job, this time for a dead hemlock.
New threads New posts
-
test
-
-
-
-
-
Light 14 or 16" narrow kerf bar for 200t or 201t- Started by southsoundtree
- Replies: 9
-
