Compact Bulldog Bone

[TJG]

If you could anchor the standing end next to the side of the BDB it might work even better. All you need is a custom carabiner with two eye holes integrated on one end, patent pending ;-)

-AJ

I could see several applications for this type of biner good idea!
Ted

 

[Worthaug]

If you could anchor the standing end next to the side of the BDB it might work even better. All you need is a custom carabiner with two eye holes integrated on one end, patent pending ;-)

-AJ

The "BinerPlate" or "BatBiner"????


Reed Wortley
CA# SO-6953A
CTSP# 01739

 

[smsunman]

the sketch has merit but it runs into to much force on the gate side.

 

[surveyor]

Love the sketch for the artistry. unrelated but neat picture.
https://www.natgeocreative.com/ngs/flashsale/product/?cur=13

 

[monkeylove]

the sketch has merit but it runs into to much force on the gate side.

We can put gates on both sides. Just like double crotching we will only be applying 1/2 the load to each gate.

Stop thinking about it, I'm just messing with @moss

 

[moss]

Then there's this...

The Paw-O-Biner? Or F'd Up Paw Biner Thing?

 

[macswan]

Kinky

 

[surveyor]

 

[Treetopflyer]

I'm excited to see that old dogs fresh face again . My old dogs wore away many moons ago. The bones though only got better with wear! Dogs are a mans best friend! Lol. I'm pleased to be adding a few more to the pack. After I get the micro adjustments Dailed in keep your eyes out for these old dogs on tree bay. NOT! Lol

 

[Treetopflyer]

I really just need all these bones for my kids. Here's my four year old daughter on one.

 

[CutHighnLetFly]

@Treetopflyer Aaron's runnin' a pound out in Jersey! Lemme know if you got a rescue that needs a good home hahahaha

 

[surveyor]

Be careful with that little kiddo. Did she ascend under her own power?

 

[colb]

I'm excited to see that old dogs fresh face again . My old dogs wore away many moons ago. The bones though only got better with wear! Dogs are a mans best friend! Lol. I'm pleased to be adding a few more to the pack. After I get the micro adjustments Dailed in keep your eyes out for these old dogs on tree bay. NOT! Lol

Did you run that sk unit over those bricks without dispersing the ground pressure? I just had a job like that where I put plywood down.

 

[kingjames1620]

Ok...... so where do i buy one ?!?

Sent from my SM-J700T1 using Tapatalk

 

[kingjames1620]

Ok..... so where do i buy one?

Sent from my SM-J700T1 using Tapatalk

 

[Treetopflyer]

Be careful with that little kiddo. Did she ascend under her own power?

I set her up a 3 to1 with a revolver on a ring loop prusiked up that I bumped up after she approached it . The bone was always in my reach on ascent. We established low and slow that she could not even descend . She was just not able to apply enough pressure to top arms to descend at this point. So I did assist her in ascent and descent. Getting stronger everyday so yes we're very careful!

 

[Treetopflyer]

Did you run that sk unit over those bricks without dispersing the ground pressure? I just had a job like that where I put plywood down.

I run over them at my house. If that was a client's property it would've covered it for sure.

 

[Treetopflyer]

@Treetopflyer Aaron's runnin' a pound out in Jersey! Lemme know if you got a rescue that needs a good home hahahaha

Ever since I started climbing two bulldoggbones every climb I feel like I'm the one who's been saved!!

 

[TimBr]

@kingjames1620; Welcome to the TreeBuzz forum! I think you will like it here.

If you wish to buy a new adjustable Compact Bulldog Bone, you need to send a private message to @surveyor, and he can tell you what is required to obtain one. surveyor makes them all himself, and is the only source for a new one, I believe.

Tim

 

[kingjames1620]

@kingjames1620; Welcome to the TreeBuzz forum! I think you will like it here.

If you wish to buy a new adjustable Compact Bulldog Bone, you need to send a private message to @surveyor, and he can tell you what is required to obtain one. surveyor makes them all himself, and is the only source for a new one, I believe.

Tim

Thank you for the warm welcome and info. I am a hazard removal/danger tree expert out of northern ca. I love some srt!

Sent from my SM-J700T1 using Tapatalk