New, Used, Rebuilt, and Salvage Chipper Parts

[JakeRiggs]

Do you have the tool box for the battery for a bandit 250?

 

[Trevor Balgavy]

Do you have the tool box for the battery for a bandit 250?

I sent you a message Jake

 

[CutHighnLetFly]

@Trevor Balgavy
Think you could help my friend out finding a radiator for a '91 Vermeer 1250?

 

[Trevor Balgavy]

That's a tough one @CutHighnLetFly , I don't have one of those machines in the yard. What engine do you have on it? Have you tried having yours recored?

 

[Merle Nelson]

Another possibility....I was in a auto shop that focused on american muscle cars. I was supprised that these beautiful and well made aluminum radiators were going for only $200 to $300. The last radiator I bought for my 1990 F350 was $300 and had plastic tanks.

The guy said, no there isn't one made for that pick up off the shelf but all we do is check your in and out hose configuration and basic size of radiator and then use adjustable brackets to adapt one. ....next time.

 

[CutHighnLetFly]

That's a tough one @CutHighnLetFly , I don't have one of those machines in the yard. What engine do you have on it? Have you tried having yours recored?

It's not mine, a good friend's so I'll ask and tell you what engine. It had been recored 3 times in the past.

 

[BigGTP]

Looking for rear cutting disc bearing for 94 WC17 woodchuck

 

[Trevor Balgavy]

Any chance you could message me a picture of the bearing? And I believe the shaft size should be 2-7/16" diameter correct?

 

[BigGTP]

pretty much no bearing left. I'll have to mic the shaft

 

[BigGTP]

Looking like a double bearing

 

[BigGTP]

Yes 2 7/16. .. it mics close as I can get it to 2.440 this is a photo of the outer housing

 

[Trevor Balgavy]

We've got them, I can cut the flatspot in it like you have there or you can, either way! We've done a lot of that way. I'll PM you with the details.

 

[BigGTP]

I'll be back form military work on Thursday an going to cut old one off to check shaft then I'll hit you up