Search results

  1. L

    Bil Jax 55xa vs nifty Lift SD50 vs others

    Sounds like his load holding valve was leaking, possibly from a piece of debris in it.
  2. L

    Bil Jax 55xa vs nifty Lift SD50 vs others

    I've heard silicone lubricant spray can help with the freezing outrigger switches... I've never had that problem with my SD64s in balmy Mississippi.
  3. L

    Lift for crane removals.

    The SD64 gets to 70’ working height inside a 12’ working radius. An SD85 would be very interesting, to me.
  4. L

    Hooklift tips wanted.

    The hook lift hoist should easily outlive the chassis as well.
  5. L

    Carbon Fiber in Low temps ?

    You won't be climbing in temperatures that will affect carbon fiber.
  6. L

    my notyoutube channel

    From a videographer perspective, the blown highlights in the forest footage is distracting to me. I like the focus rack for the intro. I like the other clips being spread throughout the video... I need to make something similar for my company. Some of the worst footage from the current...
  7. L

    Lift Advice

    The SD64 also only has to be level within 3* to achieve the unrestricted/normal chart. The gradability specs (driving power) of the SD64 are quite impressive, topping the tracked lifts that I've compared it to.
  8. L

    Lift Advice

    Sending a PM.
  9. L

    Lift Advice

    I’m a Nifty user and a Nifty dealer with the SD64 being the only machine I usually stock... The SD64 is my bread and butter. The only parts issue I recall was getting green paint after two machines were damaged in transit... the paint is sourced in the US, that supplier had some backlog or...
  10. L

    Attention Grapple Saw Truck Owners

    There are several around Indianapolis.
  11. L

    New outrigger pads

    I use/include the 24x24x1” pads with my Nifty Lift SD64s. They’re great pads, never had a complaint with them.
  12. L

    Covid Close To You

    If it’s Covid caused deaths, then there should be, on average, ~940 excess deaths per day which would show up better on a weekly or monthly timeframe. (Shouldn’t overshadow the ~8k other deaths each day) it’s been at least a couple months since I looked at excess deaths data and ran the...
  13. L

    Looking for stumper

    What’s the goal?
  14. L

    Best Cab and Chassis for a Grapple Truck

    What’s your budget? How many yards? Rear mount or dump?
  15. L

    Chipper problem

    I’d check the fuel and air filters, but with a CEL on, you need to see what the codes are.
  16. L

    Hooklift tips wanted.

    A 26 ton hoist on a single axle truck is comical. I have a 24klb rated hoist on an International 4700. Single drive axle plus a tag axle giving me 49klb of axle capacity. Truck is 18klb alone, 23klb with the container. I don’t chip, but for me the truck would absolutely suck without the tag...
  17. L

    NiftyLift tech needed....

    His problem is with the construction based SP line of machine... the only help I know of at the level he needs would come through Nifty.
  18. L

    NiftyLift tech needed....

    What did Nifty say?
  19. L

    Fly jib rating

    There are multiple jib configurations available for most booms in that side class, beyond that it depends on angle and extension (of course)... retracted, that seems reasonable to me.
  20. L

    Which grapple for Gehl 540?

    I didn’t need the hydraulic rotation with the articulating loader. I used pallet forks for bigger wood.

New threads New posts

Back
Top Bottom