Search results

  1. burtonbc1400

    Samson Rope choices.

    I am a fan of Samson Ropes. I have historically climbed ddrt on hitchhiker pulley/VT, and also SRT w/ hitchhiker/VT +ropewrench. I just started climbing with a roperunner pro. I've run Samson Voyager in the past on ddrt, with 10mm ocean hitch cord. I loved it. I would consider getting it...
  2. burtonbc1400

    Ditch Witch SK500 too small?

    Did you end up getting the sk500? If so please tell us about your experience
  3. burtonbc1400

    Bluetooth comms app

    sena 10s
  4. burtonbc1400

    Midsize saw purchase help

    I have two ms362c . They are great saws. best power to weight ratio. I run them with a 20" bar and a 24" bar. No problem in the tree. I see no point for a smaller medium saw between the 200t/201t and 362.
  5. burtonbc1400

    Cinching Up with a Second Laynard During Removal- mechanical vs friction knot vs running bowline

    That looks like it could side load your biner?
  6. burtonbc1400

    Looking for Fundamentals of Gen Tree Work

    I printed my pdf copy at Staples, it cost 70 bucks
  7. burtonbc1400

    Comment by 'burtonbc1400' in media '3:1 DWT with RnW and OmniBlock Pulleys'

    Intuitively, this seems like it would put undue pressure on the tip end of the rigging branch
  8. burtonbc1400

    Retrevial options for pulley saver

    A small piece of hardwood could work
  9. burtonbc1400

    Chipper hourly rate in Canada?

    Is your 300 minimum for just the chipper? You have a per man charge on top of that? I usually have a 2hr minimum charge, and I charge to have the chipper onsite, even if it only does 15 min of work. Which 15min chipping : 1hr 45min cutting is about the ratio.
  10. burtonbc1400

    Climbing line for rigging?

    i use old climb lines for rigging. 1/2 , 11.8m for small take down's and tag lines. any heavy wood or anything important i use dedicated 5/8 rigging lines tho
  11. burtonbc1400

    Chipper hourly rate in Canada?

    Serf Life is correct. Cleaning up someone elses mess is the pits. especially old messes. As far as charging out, at first i went with a similar price to the rental shop. Having rented from Nor-Val before I got my chipper, I know that after fueling up, it cost me $400/day. So at first I was...
  12. burtonbc1400

    Adjustable rope bridge rope grab/cam

    Z'sTrees if you would post a pic of your set up, I would greatly appreciate it. Thanks
  13. burtonbc1400

    Adjustable rope bridge rope grab/cam

    seems people like the ct roll n lock. Can it be released under pressure?
  14. burtonbc1400

    Adjustable rope bridge rope grab/cam

    evo, what video are you referencing?
  15. burtonbc1400

    Adjustable rope bridge rope grab/cam

    I've seen a few versions/ideas. Not a fan of the zip ties set up, forget who posted that. I'm looking into getting the monkey beaver harness, and I'd like to copy what August Hunicke has. Anyone have good results with a certain a rope grab? Petzal's Micrograb looks like a good option...
  16. burtonbc1400

    Selling 2002 F-450 with Aluminum Dump - Reduced

    No kidding, I doubt my 7.3 would start at 7 degrees F (is about -13 C) without being plugged in
  17. burtonbc1400

    What's your preference of Rigging Ring slings?

    I figured if I added a medium or large ring on a prussic to a dead eye beast, it could function like a friction saver does for a climb line and be retrievable remotely
  18. burtonbc1400

    What's your preference of Rigging Ring slings?

    The set up I'm looking into is a 12' beast deadeye with a large 36" loop as a prussik on it
  19. burtonbc1400

    Vermeer BC 1400 chipper knife torque?

    i use never seize
  20. burtonbc1400

    Vermeer BC 1400 chipper knife torque?

    Thanks, i did call vermeer 210 ft lbs

New threads New posts

Back
Top Bottom