Search results

  1. Jimmycrackcorn

    MS201t vs T540XP

    Hahaha.. i can imagine.. that Echo is tiny. To get a better idea of your comparison, when you say modded by Forshore.. you mean ported?
  2. Jimmycrackcorn

    MS201t vs T540XP

    This is such an important factor.. balance & usability.. obviously power to weight too.. I just bought a 540 to much around with.. it's got the damn stumble issue i haven't hashed out yet.. But honestly, as much as i trash in echo saws, i kinda wish i bought that tiny one & sent it out for...
  3. Jimmycrackcorn

    Mixed Material Biners - SS and Al

    You'll see that beefed up design on some of the via ferrata gear. As the biner us constantly scrubbing against a steel wire. Edelrid or some other euro company has this design implemented into their rope snaps.
  4. Jimmycrackcorn

    Omni Block Failure

    You know what? I just remembered I actually asked rock-o all this before.. i just searched my emails.. here is their response to questions about shock loading either of those two pulley models & asking what the difference is.. I'm actually hesitant to post this quote, as the consensus around...
  5. Jimmycrackcorn

    Omni Block Failure

    Are both of the holes on them deformed? I get what your implying with the deformation but they are supposed to stay in without. I wonder if it's just an assembler using the wrong punch to set it. Seems odd they will purposely deform a precise product like that. What is the difference anyways...
  6. Jimmycrackcorn

    vvvvvvvvvvvvvvvv

    With scuba gear? Shucks man, that's cheating! Do it with no tanks!! How do you know your #3 & that no one else has been there except you & the other 3? Hahaha.. I'm just mucking with ya..! That stuff must be pretty wild! That's one recreation I'm not too sure of.. My fat ass would get stuck in...
  7. Jimmycrackcorn

    Documenting my hand-sewn eye process

    Nice.. Nice.. good to hear.. Yes.. your were correct in your assumption.. there's PLENTY of real estate on those leg pads.. there frigging huge & deff comfortable too.. but in my opinion.. a complete waste if space in terms of being able to use them for other purposes.. Time was taken to sew...
  8. Jimmycrackcorn

    Documenting my hand-sewn eye process

    Hey.. don't sweat the measurements.. I emailed wesspur & they got back to me pretty quick.. Ok.. so you keep it on your leg.. i was thinking about that VS trying to get at it injured & one handed behind my back. I was just concerned about the bulk of it being behind my leg & if it would...
  9. Jimmycrackcorn

    Documenting my hand-sewn eye process

    So i got irritated with the lack of gear loops/storage on my Monkey Beaver.. I sat there for hours staring at a mess of 5-8mm Cordage as well as a heap if tubular webbing.. the creativity gears were grinding pretty hard, but this is all i could think of so far that wouldn't end up looking too...
  10. Jimmycrackcorn

    What to do when you don’t have a ring you want.

    Pretty rad man.. i love how these machines are considered "small" @750lbs..lol. They really do get freaking massive in size as you go up in material capabilities.. I got this new machine & axle shop/drive shaft shop that opened up a mile down the road from me.. i popped in to just to say hello &...
  11. Jimmycrackcorn

    CLIMBING SADDLE SHOULDER HARNESS

    Hello again Stan! I swear i ain't stalking ya! Lol.. I wanted to say, you can find a ton of this stuff if you look into tool belt suspenders or "Tactical H harness".. Cheap too.. none of that BS Arb related markup you & me have talked about in the past. Were talking 10-20 dollars on the low end...
  12. Jimmycrackcorn

    Water separator freezing up on Vermeer

    "You haven't seen anything like that, except for the first fuel filter which obviously isn't that" Ya lost me there bud.. Did you see that filter under the hood at one point? Or No..? Do you know who makes the motor? Is it a Kobota like the Donaldson filter chart wants me to think? "It helps...
  13. Jimmycrackcorn

    Water separator freezing up on Vermeer

    Ohhh yuk.. that is a bit of wrenching.. especially if on a V8 from the salt belt.. guess I've been lucky with all mine.. Mingya.. i feel bad for the guy who bought my last powerstroke & thought he was going to replace the manifolds & up-pipes.. i couldn't even see the bolts anymore.. Just a...
  14. Jimmycrackcorn

    Water separator freezing up on Vermeer

    Yes Colb.. you can add whatever u want.. With a quick search & assuming your engine package I came up with a really small Donaldson 40 mic filter for that system.. it looks as if it's one of those designs that just floats inline.. does this look familiar? If i were you & i really wanted a...
  15. Jimmycrackcorn

    Water separator freezing up on Vermeer

    Hey Ry.. i kinda just breezed through the thread & didn't see it mentioned.. but have you replaced the filter itself? The block heater, the dual block heater are going to be your best friend when it comes to actually making it fire up.. most manufacturers have made it simple for aftermarket...
  16. Jimmycrackcorn

    3M Peltor WS-CUSH Bluetooth Headset

    Peltor Lite comms.. I'll deff look into them.. As far as the Sena/OSHA comment.. what do you mean? They "Produce"... or do you mean, "Allow", sounds greater than a certain OSHA rule.. I ask the difference, as I wouldn't be surprised if some of regular everyday music headsets can produce sounds...
  17. Jimmycrackcorn

    Single beast ring terminal rigging??

    Nah man.. do it. You'll be fine.. You have other options too.. although simple, it don't have to be a whoopie.. if you peak around here there is lots of creative Frankenstein creations to get ideas from.. How much Rex you got? I think i made a 8ft ultra sling out of something like.. maybe...
  18. Jimmycrackcorn

    Looking For New Tribe Onyx

    Hey Rico.. What is this butt strap you speak of? I don't think I've seen it in all the pictures I've looked at. & The secondary side straps.. what is their purpose? Do they only "tighten up" per say, when you are standing? In other words to keep the leg loops from sagging or falling down a bit...
  19. Jimmycrackcorn

    What to do when you don’t have a ring you want.

    Not too shabby man! I've always wanted to work in a machine shop just to get some basics under my belt. Do you buff then afterwards with something like a emory wheel? Or do they go straight into use? The idea that you can make them any demension you want is awesome.. What other machines you...
  20. Jimmycrackcorn

    What to do when you don’t have a ring you want.

    Any pics of finished product? Also.. Whatchya think it cost you to produce..?

New threads New posts

Back
Top Bottom