That's a Rolls-Royce Eagle VIII V12 engine. https://airandspace.si.edu/collection-objects/rolls-royce-eagle-viii-v-12-engine/nasm_A19610135000
The location and story: https://forums.sassnet.com/index.php?/topic/341006-first-lieutenant-charles-f-webber-and-colonel-francis-c-marshall/
The...
I used a line in this big pine to remove some dead limbs and suckers from the small oak nearby.
I couldn't let that high TIP go to waste, so up I went.
I missed that when getting started so I recently bought some Sterling WorkPro 12.5mm which meets the spec. Compared to the Samson Voyager and Vortex I've been using it's not nearly as supple and easy to knot. The WorkPro is VERY resistant to twisting, and you'll end up spinning as you climb if...
Don't have to worry about this one anymore. The HO discovered it had a big root going under the corner of the house, and several days later a tree company with a big Terex took it down and ground out the stump and root.
do something about this other than report it to the city electrical department.
High voltage lines up high with communication lines below alongside major highway. Large broken limb (probably 5" at break) with branch resting on the comm lines. It's been like this for several months, and...
Closeups show lots of wound wood that appears to be holding the adjacent bark firmly in place.
It's probably a race between the exposed wood rotting and/or getting attacked by insects and the wound wood closing over the damaged area.
I went over on Sunday evening to get a line in this oak for an early Monday climb. My first shot gave me a nice high TIP, so I decided to stay and get the job done. The tree had every possible combination of dead, live, broken, loose, and hanging with a bunch of pesky suckers thrown in...
I'm surprised you're willing to give up so much length for tension adjustment by using the original loop on the basket. I got rid of it when I switched to the snap release...
and shortened the assembly a little more when I switched to the archery release.
Using two hitches on the rope uses...
A nice evening climb to remove a hanging broken limbs and a pair of dead limbs.
Back in the same yard the following morning to remove several dead limbs over the play area.
Two were already in the HO's cart when I remembered to take the pic. This long one was over the swing set.
After a recent day with 40mph winds I walked by this tree several times without seeing the freshly broken limb.
Cutting it into pieces on the way up and lowering the rest with a rope didn't take long...
and it was a short haul to the curb. Gotta love front yard trees.
I found this today while removing a still-alive broken branch from an oak tree.
The left piece was attached to a large limb. The right was hanging vertically. The hollow on the right only extended about two inches inward. The hollow on the left extended into the opening at the break. The...