ATH's latest activity

  • ATH
    ATH replied to the thread Rope ID Help.
    But at least we can learn about climbing systems from the pictures on Amazon...
    • Screenshot_20260508_191654_Amazon Shopping.webp
  • ATH
    ATH reacted to Reach's post in the thread Rope ID Help with Like Like.
    We found it! Thanks to Google AI search, this rope has been identified. Not by me, because I am not technologically advanced enough to...
  • ATH
    ATH posted the thread What's killing arborvitae? in Bugs and Crud.
    Quite a bit of Arborvitae (T. occidentalis) (a lot of Emerald Green...but there's a lot of Emerald Green planted). Just smoked coming...
    • 20260508_151329.webp
    • 20260508_151327.webp
    • 20260508_150928.webp
    • 20260409_163005.webp
    • 20260409_092322.webp
  • ATH
    ATH reacted to Njdelaney's post in the thread Rope ID Help with Like Like.
    The 3-strand looks like 1/2" Teufelberger Multiline. It's great for lots of stuff but not climbing. It is the best rope for the...
  • ATH
    ATH reacted to Simpleiowaguy's post in the thread Rope ID Help with Like Like.
    Multiline is awesome in the Maasdam, it performs way above where it should as a rigging rope also.
  • ATH
    ATH reacted to Mick Dempsey!'s post in the thread Avant Thread! with Like Like.
    The 760 earning it’s keep.
  • ATH
    ATH replied to the thread Paying for referrals.
    That makes sense... lower temps to avoid the melt means more passes to get through
  • ATH
    ATH reacted to Matias's post in the thread Paying for referrals with Like Like.
    I'll find the piece I made at some point and show you. When you dial in your settings it's quite crisp. It takes several passes to cut...
  • ATH
    ATH replied to the thread Paying for referrals.
    I have a hood and vent everything outside, so not a huge concern...but yes, that's my primary concern. I suppose it really depends on...
  • ATH
    ATH reacted to Matias's post in the thread Paying for referrals with Like Like.
    The laser cutter I used was very well exhausted, with something like a hood vent over it. The whole shebang was in a closed box with a...
  • ATH
    ATH replied to the thread Paying for referrals.
    I'd rather cut wood than plastic with the laser cutter... If you just are doing business card shapes, you can cut those with other...
  • ATH
    ATH reacted to NWPEZ's post in the thread GRCS Worth it with mini. with Like Like.
    Alright, got the push I needed to not talk myself out of it! Haa I appreciate all the insite. I know it won’t be a daily driver but at...
  • ATH
    ATH reacted to Reach's post in the thread Paying for referrals with Like Like.
    Cards of Wood uses two thin layers of veneer with a very thin plastic layer in between, so their cards are quite flexible. In fact, they...
  • ATH
    ATH replied to the thread Paying for referrals.
    Or use a thick veneer... Or maybe even take three very thin pieces of veneer and put a middle one at 90° to the other two (mini plywood...
  • ATH
    ATH reacted to southsoundtree's post in the thread Paying for referrals with Like Like.
    I may have run it through the planer, beforehand .
Show older items

New threads New posts

Back
Top Bottom