Search results

  1. TJG

    MS192

    Yes I thought Briggs would stand behind their motor since I found out about the head problem from an Ariens Service Manager. I would have been looking at the cam shaft for problems but Briggs. wouldn't do a thing. Warranty is only 2 yrs. I am on my 3 yr. Hours don't matter. It was hard to find a...
  2. TJG

    MS192

    Do you think I should go through the dealer it is probably going to be more expensive. I have found many online. They all look like the right carb. and they say the fit 192 the part number is C1Q-S257 which could be a new and in proved version. Or it could be one that fits the 200's. Money is...
  3. TJG

    MS192

    I just noticed that those parts aren't even listed for sale in that diagram. But if it is only an O ring I suppose I could find something that fit. I would have to look for a place maybe Home Depot or Ace Hardware that would have metric size's. I always like a challenge. Ted
  4. TJG

    MS192

    Thank you very much I'm not sure which carb I have but they list 3 in the parts diagram from Stihl. I was looking at just buying anew one I can use the old one for parts and a new one's are cheap enough C1Q-S134 is one of them and the last three number differ on the other that are listed. This...
  5. TJG

    MS192

    I couldn't find any information on this part if you have a source please let me know. Or you could explain it in a little more detail that might help me find it. I have been through just about every chain saw carb. made. I am least familiar with the Zama's. Ted
  6. TJG

    MS192

    Are you saying to look into the carb. or the parts diagram. I will find a parts diagram for that carb and check it out that sounds like it could be the culprit. I started it the other day when it was cold out side and it seemed to run well. The problem only happens when it is warm to hot ambient...
  7. TJG

    MS192

    I you referring to a diaphragm in the carb? I never heard it called an accelerator pump. If so I replace it.
  8. TJG

    MS192

    I did both and a new plug. Everything I could think of I think I will spray some carb, cleaner around top end seal and bearing seals to see if I get a reation. Probably should just spring for a leak down tester!!
  9. TJG

    MS192

    Yes I am running a pico chain and a 14" bar. It's not a power issue it cuts great when I get the carb. dialed in. The carb just doesn't stay dialed in it just doesn't have a happy place. It is great for awhile then I have to mess with the adjustments after awhile. Then if I shut it down I have...
  10. TJG

    MS192

    I pick up an MS192 from e-bay a while ago and can't seem to get the saw to stay running properly. I replaced air boot and rebuilt carb. It seems to constantly need to be adjusted. My next step is to pressure test and look for leaks. I don't have all of the tools I need to do this but I think I...
  11. TJG

    Cut throats

    Some people are just a strange bird.And that's a fact for sure. I've run into some real doozies over the years of service work. Ted
  12. TJG

    Compact Bulldog Bone

    Get the adjustable BDB and you can play with the adjustment to get it to react to the rope you are using the way you want it to. I would set it to stop dead when I let go by slowly releasing it you can slow down before coming to a screeching halt! It is by far the best device I own!! Thanks to...
  13. TJG

    Cut throats

    I'm glad you guys are here to help each other. I want to start a small arborist business.. But For now my body is saying not a chance. I have allot of pain and climb when I can. But there is something wrong with my red blood cell count and my Dr. says everything is normal but you are anemic and...
  14. TJG

    So the 880 is pretty heavy....

    I saw a video from Glenn Blair talking about using a drone to calculate tree height and condition. They can see were we can't!!
  15. TJG

    So the 880 is pretty heavy....

    I say the video Reg. What a bitch sorry it work out that way!!!!! And you have to be one tough dude to take a tree that size down in fire wood chunks!!
  16. TJG

    Dr. Cornwallis's Work Thread And Stuff

    I would contact surveyor he has the Bull Dog Bones and I think they are built better than any other mechanical. There is a thread Compact Bull Dog Bone I think that is the name of it. And a little cheaper.
  17. TJG

    So the 880 is pretty heavy....

    That really is a great set up I taught myself to mig weld comes in handy. Is that a stump grinder next to the chipper if so it really is an all in one.
  18. TJG

    So the 880 is pretty heavy....

    That is one HUGE tree Reg. good luck on that job. Definitely video material!!
  19. TJG

    Help indentifying this rope and usage for it.

    I agree send it to Tree Stuff I would bet it is not as strong as it may appear. I have some inexpensive rope that is hollow braid and it breaks at 850lbs. Looking at it you wouldn't think so. So I use it for a tag line.
  20. TJG

    What to tell customers to expect from working with a Crane Company

    I personally don't have the resources to bid on a crane job. And after reading this don't know I ever will I like to let customers know as much as they need to and answer questions honestly. In the case were getting a crane is hard they would have to know that as far as price I would be the one...

New threads New posts

Back
Top Bottom