Here we go again, the turd has struck again. Started seeing oil spots on my saw pants today then down the inside of the bucket. Found that the crankcase seal, which you all will know is also what seals the bar oil tank halves, has failed and the bar oil now pisses out the side as fast as you can...
[ QUOTE ]
To be honest, I don't care if the pins and e-clips are rusted, petzl should've taken this into account when making the product (when choosing materials). Whether wet or dry. When it come to lift support, the product should be capable during any conditions. It makes me sick knowing...
If that's an update new release zigzag, that guy should be beaten. Surface rust on the pins and e clip etc, and they've only just been rereleased. Looks like it was dragged to the job site. Thanks for posting Mark. I've got a new zz waiting for me on a truck somewhere between petzl and me. If...
[ QUOTE ]
I can't stand having to make another cut to get the stump lower after the felling cut.
I definitely cut high when it does not matter, or to get away from decay or something else (barbed wire in that first tree) or to shorten the length of fall.
but unfortunately my co-workers never...
Good thing you're not
Those ash are dirty. I'm of the opinion in my area now, if you can't flop or get a crane or a lift to it, walk. It'll come down by its self... Sooner or later.
[ QUOTE ]
There horrible grapples. You should give me your friends number so I can have him send it to me...
[/ QUOTE ]
X2 they are scrap metal. You should have him send it north.
I was about 250 on my 475cummins, but I have a heavy foot when operating. And about the same with the hyd. Never heard of burning it with the diesel though.
[ QUOTE ]
[ QUOTE ]
That's about as realistic as expecting it never to break.
Why is your suspension breaking bolts, classic?
[/ QUOTE ]
when we bought the kboom, the reason we went with the dealer we did was that they had enough spare parts to build the crane from their stock room, not so...