Bart_'s latest activity

  • B
    In 2002 a Narc :) provided information...
  • B
    Bart_ reacted to Muggs's post in the thread Rope grab recommendations for rigging with Like Like.
    I've had a prusik slip multiple times from guys pulling on fiddle blocks attached to pull lines. The prusik melts to the line, they end...
  • B
    Bart_ replied to the thread Songs of Perfection.
    In penance for my foisting post (bad makes the good seem that much better?) and for a change of mind set to go to a different time to...
  • B
    I made half hearted progress trying to find hitch pull testing so far. But, I did find drop testing where a short drop of 185 lbs...
  • B
    My cheap 2nd hand chaps just made way for the bar. Happened during a drop of maybe 18 inches. I pitched the saw, wrapped the worst of...
  • B
    Not nice to hear. Hope you heal up well. Flesh/muscle damage may be easier to recover from than ligament damage and I hope that turns...
  • B
    Bart_ reacted to Steve Connally's post in the thread TCIA WTF? with Like Like.
    Times they are a changing. I noticed a shift some years ago. I have nothing but gratitude to so many people on here. Unfortunately...
  • B
    Bart_ replied to the thread New device from ISC.
    Kevin, would you have an opinion to offer on the reflex top link/bird/rw vs the zigzag top link/bird/rw contacting and general...
  • B
    Bart_ reacted to treebing's post in the thread New device from ISC with Like Like.
    My theory is that the reflex relies on a prerry sharp ede on the top link to initiate the grab. I notices that i was using that top...
  • B
    Bart_ replied to the thread TCIA WTF?.
    IMO I don't see the need to stop articles. I just think the buzz content can form the kernel or stepping off point for a normally...
  • B
    Bart_ replied to the thread Nerd Alert.
    Amp-ed sound effects built inside the guitar! Youtube served this up to me. Cool!
  • B
    Bart_ replied to the thread OLDS-Overhead Lowering....
    My BMS spool was rounded corners mild steel thick walled tubing, endcaps welded in, thread in pivot screws, thread in mild steel rope...
  • B
    Bart_ replied to the thread OLDS-Overhead Lowering....
    There's always the fab/refurb option. You don't have to be exact in part replication, just adequate for the purpose.
  • B
    I see the continuum as worst concentrated force load on small heavy concentrations toothed devices, not as bad concentration on more...
  • B
    Bart_ replied to the thread Mysterious echo2511t issue.
    The secret to using an impact is the apparent instantaneous immovability of the inertia of the crankshaft and flywheel during the...

New threads New posts

Back
Top Bottom