XRR Beast Three headed Cerebus

P2180008.webp

so the two heads were done with two pieces of tenex , measured out then spliced the first with the ring (short piece) then the long section with the ring then brummelled the two together several times then buried the short piece .
separately the opposing head was spliced on one end then had the two headed section fed in whoopie style with a much longer than usual slide section (which turned out to be a good move) and finally creating a tail on each end.
hope that helps - I spent a fair amount of time laying it out and going through the moves towards the completed piece then rechecking before marking the tenex prior to starting the splice.
and to be honest the brummels are a bit rough :)
 
Thankyou Steve :LOL:

so far - child bearing ( no hips ) and managing my finances but that is improving :)

heres is a treat for you good sir,
so this happened last week.
IMG_1840.webp

tried a neck loop and hated it, swing dude is organising another batch of chesties and hooking me up soon so got that part sorted out.
I have a order coming in by early next week with some more toys to try out some ideas I have wanted to explore on SRT.
progress is slow but I am getting there.
also there is a something something in the wind can't say more but keep your ears peeled Brother ;)
 
Lookin good! Lookin good! Keep with it. At first it may seem like it doesn't work but if you stick with it and tweak it, you'll be a believer!! For now just take a piece of webbing in a loop and put it on like a back pack. You know, behind the neck and arms through then capture the chest strap parts with a biner, presto. Instant chestie. Hope that makes sense. If not I'll post pics.
 
Stihlmadd said:
View attachment 36483

so the two heads were done with two pieces of tenex , measured out then spliced the first with the ring (short piece) then the long section with the ring then brummelled the two together several times then buried the short piece .
separately the opposing head was spliced on one end then had the two headed section fed in whoopie style with a much longer than usual slide section (which turned out to be a good move) and finally creating a tail on each end.
hope that helps - I spent a fair amount of time laying it out and going through the moves towards the completed piece then rechecking before marking the tenex prior to starting the splice.
and to be honest the brummels are a bit rough :)
Click to expand...
Hey SM, are these X Rings the Large or X Large? I'm really liking the design, plus I have (2) 25' pieces of 1" T Rex, I'm thinking I'd like to make a couple of these w/the Beast rings ! Plus 40' of 3/4" for a Large Ring setup, as well. I'm thinking these or Tom H's design. For versatility!
 
Matt go into the rigging and roping thread - XRR sling ideas - look up the boomsling by boomslang .
it is a better way to do the double head splice than I used for cerebus.
I nutted it out so you will too and there is diagrams and pictures to help you out.
have fun.
 
You must log in or register to reply here.

New threads New posts

Back
Top Bottom