Work Photos
- Thread starter Leroy
- Start date
Clearing smallish softwoods off a slope where they were interfering with a friend's mountain view was a vine nightmare, although it was kinda fun when I cut that last tree anchoring the vines and could watch up to 10 trees all fall in unison.
Sfoppema
Branched out member
- Location
- Central MA
Reduction/structure pruning red maple for the 1 Percent in Jamestown RI. Windy!
VenasNursery
Been here much more than a while
- Location
- Michigan
Gorgeous
Bucknut
Carpal tunnel level member
Their house looks like a shopping district in Sweden.
Sfoppema
Branched out member
- Location
- Central MA
Still being built. 9 car garage with heated floors. Has to be at least 10,000 sq feet. Just a seasonal spot, probably only be there a month or two out of the year. Supposedly the owner has never been to the property.
Landscape architect hired us in for the week to prune every tree on the property. It's a few acres. Good people to work for I guess lol
Sfoppema
Branched out member
- Location
- Central MA
Down by the water with the boys. Saw coast guard boat going by had to snag a pic. renting the nifty for the week, but all four of us capable climbers, so plenty of climbing occurring as well.
Bucknut
Carpal tunnel level member
Indeed. Rich people with lots of trees who don’t want to be home while you work. My favs.
And the wife and I feel bad about building our 950 sq ft dream house...
What do you think of that lift?
Reach
Been here much more than a while
- Location
- Atglen, PA
MA Arborist
Branched out member
- Location
- Cape Cod
RyTheTreeGuy
Branched out member
- Location
- Canada
Stunning...photographer?
MA Arborist
Branched out member
- Location
- Cape Cod
No. But thank you
I took the pic from the willow I was in. One of the rare times that I brought my phone with me
Last edited:
AdkEric
Branched out member
- Location
- Adirondacks
River birch removal, good amount of backweight towards the house. Redirected a pull line thru a nearby spruce, then into a portawrap anchored to the truck. Pretensioned with a 5:1, made a nice wide face cut, backed it up with wedges, then pulled it over with the 5:1.
VenasNursery
Been here much more than a while
- Location
- Michigan
Big maple in a tight spot today
Serf Life
Been here much more than a while
- Location
- Maine Island
Had a lovely solo day felling and rigging from the ground. Mostly dead 20” dbh oak leaning to the right (house and septic). Well head is under the red can. 22” dbh brushy spruce leaning to wires wedged over with a line rigged just in case.
Set a block up the pine and mini leaned/lifted a super nasty rotten maple that was leaning hard to drive. Notch, pull, bore.
Organized everything and had some fun with my new 15xp. From felling the oak to finishing chipping was 3.5 hrs. Grabbing logs another day.
Few years ago I was towing a dump trailer with my rotting pickup slashing brush and moving all the wood by hand. Back, shoulders, and wrist issues and truck sucking money. Super appreciative today of equipment, health, and customers who have been there from the start.
Set a block up the pine and mini leaned/lifted a super nasty rotten maple that was leaning hard to drive. Notch, pull, bore.
Organized everything and had some fun with my new 15xp. From felling the oak to finishing chipping was 3.5 hrs. Grabbing logs another day.
Few years ago I was towing a dump trailer with my rotting pickup slashing brush and moving all the wood by hand. Back, shoulders, and wrist issues and truck sucking money. Super appreciative today of equipment, health, and customers who have been there from the start.
New threads New posts
-
test
-
-
-
-
-
Light 14 or 16" narrow kerf bar for 200t or 201t- Started by southsoundtree
- Replies: 9
-
