The latest Matt Cornell harness

flyingmosstreen said:
First attempt with the setup. Frankenstein.

I never use the upper dees so went without. Shrink tube for rigidity.

It’ll take some refining but the idea I think is there. Fun build!
Click to expand...
I've got my original setup for a pruning saddle. I use both sets of Ds. I use the upper Ds for a second lanyard when repositioning. I don't like using my bridge for that and I like to keep the lowers not crowded with 2 lanyards. I have the blue CT rigging plates for the lowers now. It's do for a redo now. I'll be upgrading to a pair of REs for the rebuild.
 
96coal449 said:
I've got my original setup for a pruning saddle. I use both sets of Ds. I use the upper Ds for a second lanyard when repositioning. I don't like using my bridge for that and I like to keep the lowers not crowded with 2 lanyards. I have the blue CT rigging plates for the lowers now. It's do for a redo now. I'll be upgrading to a pair of REs for the rebuild.
Click to expand...
Nice, do you attach the uppers with the overhand as standard setup? I like the idea of the Odin rings. I have one that I've messed around with as a friction saver component.

The rock exotica rigging plates are super good on my monkey beaver though. I would need to figure a way to use them with the current webbing situation I have going on haha.

I look forward to all the different configurations that will come down the line
 
flyingmosstreen said:
Nice, do you attach the uppers with the overhand as standard setup?
Click to expand...
Yes. Just a quick hookup while climbing over a union, or through one. I'm usually already tied in and rely on my climbing rope as the second hookup. It's when I unclip from the climbing line and need to transition around a group of leaders to reset everything on the opposite side. The ''upper'' lanyard allows me to do this and release the lower and life line for a reconnect on opposite side.

Hope this makes sense. I'm on my 6th beer after a 2 day crane job of 24 plus trees.
 
Iteration #2. Went with 1/4” dyneema woopie sling for adjustable leg loops. And found these sweet soft shackles at west marine for the lower connectors. And tiny friction rings. Feels very sleek. I also realized I could still use the upper “d” as it’s just loops that I can connect lanyard to. IMG_1347.jpegIMG_1348.jpegIMG_1346.jpeg
 
flyingmosstreen said:
Iteration #2. Went with 1/4” dyneema woopie sling for adjustable leg loops. And found these sweet soft shackles at west marine for the lower connectors. And tiny friction rings. Feels very sleek. I also realized I could still use the upper “d” as it’s just loops that I can connect lanyard to. View attachment 94433View attachment 94434View attachment 94435
Click to expand...
Dyneema is not very UV resistant. I’d want a cover on it. Other than that, it’s a pretty interesting build.
 
I don't get the use of the soft shackles where you have them, wouldn't a loop do the same there? You could spice an integrated soft shackle for the leg loops to act like a buckle too!
 
SeanRuel said:
I don't get the use of the soft shackles where you have them, wouldn't a loop do the same there? You could spice an integrated soft shackle for the leg loops to act like a buckle too!
Click to expand...
Ooo I like where your heads at haha. The soft shackle could be some other sort of splice or something. It seems clean to me, and I haven’t seen This type of shackle where it’s a closed loop on one side and an openable on the other.

Having lots of fun messing with different iterations
 
You must log in or register to reply here.

New threads New posts

Back
Top Bottom