Streamlined throwball for climbing

CutHighnLetFly

Been here a while
Location
Cape Cod, MA
Alright people, who's with me on this idea:
I use a throw weight on a biner a lot to pitch my rope tail around. It's kinda lame tho, this floppy thing clipped on the rope, potential to get snagged, kinda take up some room dangling on my saddle.
Would a super streamlined throw weight be helpful to other climbers or is it just me in my head? Something like the throw pod but even smaller, with a clip at the top instead of a ring. Maybe rated clip attachments at the top and bottom so if your climbing double rope you can keep it on your rope, just toss it then clip back into it when you get it back to you?
Yay or nay?
 
Last edited:


This came to mind - just a slightly bigger version made from a piece of old rope. It's a snagless drift sinker used for bottom fishing. All this one is some regular lead sinkers inside some paracord with the ends melted shut.
 
How about a short piece of roller chain sewn into the core of a rope, made up to amount to your favorite weight.
that would be about as steamlined as possible, having it inside the rope. my thoughts are how would that effect the throat of a splice, having a roller chain buried in there.

I was thinking kinda like an ankle weight, you velcro it around the termination of your line so there is no flop
this is pretty simple idea too. you could just have it on the rope right behind the eye spice so it doesn't have to be taken off and stowed after every time its used.
 
I use the petzl steel oval, seems to be heavier than the rest. A big Dmm steel worked well, but it's slightly larger I have a preface for keygates
 

New threads New posts

Back
Top Bottom