southsoundtree
Been here much more than a while
- Location
- Olympia, WA
Nothing special...4 cherries dismantled... homeowner cleanup.
Olympia, WA, various needs.
- Thread starter southsoundtree
- Start date
southsoundtree
Been here much more than a while
- Location
- Olympia, WA
Routine.
No place to let it run.
Tried to slow it down by rolling it off the doug-fir limbs.
Running through a natural- crotch square rig set- up and execution for my growing climber who hasn't had a rigged top, herself, yet.
When possible, I catch and lower my own pieces.
No place to let it run.
Tried to slow it down by rolling it off the doug-fir limbs.
Running through a natural- crotch square rig set- up and execution for my growing climber who hasn't had a rigged top, herself, yet.
When possible, I catch and lower my own pieces.
southsoundtree
Been here much more than a while
- Location
- Olympia, WA
Ramping up for the coming spring rush.
Staying busier than I can handle... turning away work.
Staying busier than I can handle... turning away work.
southsoundtree
Been here much more than a while
- Location
- Olympia, WA
Snow atop a backlog of work, plus orchard pruning, dormant season pruning and coming spring weather means lots of work.
Mick Dempsey
Carpal tunnel level member
- Location
- France
I’m quite busy as well, new worker, new van, all positive vibes here.
Wish I was 10 years younger.
As an aside, I think about this clip a lot.
I reckon I’m in the good old days atm.
Wish I was 10 years younger.
As an aside, I think about this clip a lot.
I reckon I’m in the good old days atm.
southsoundtree
Been here much more than a while
- Location
- Olympia, WA
We've had storm- damage. Looking for some talent.
You don't have to be an Ace. You do have to be serious about safety. The rest is just eating big elephants, one bite at a time.
You don't have to be an Ace. You do have to be serious about safety. The rest is just eating big elephants, one bite at a time.
southsoundtree
Been here much more than a while
- Location
- Olympia, WA
A good message!
southsoundtree
Been here much more than a while
- Location
- Olympia, WA
Last edited:
southsoundtree
Been here much more than a while
- Location
- Olympia, WA
southsoundtree
Been here much more than a while
- Location
- Olympia, WA
Phase 1 complete, aside from one or two small dump trucks of wood, and some dirty rakings.
We mitigated the immediate concern. Waiting on a removal permit from the county for the oak, as oaks are critical habitat for Douglas squirrels, I believe.
There may not be any more rigging. I think I can drop chunks in spaces without buried utilities.
The trees were rubbing. Now there is a 3" gap.
We mitigated the immediate concern. Waiting on a removal permit from the county for the oak, as oaks are critical habitat for Douglas squirrels, I believe.
There may not be any more rigging. I think I can drop chunks in spaces without buried utilities.
The trees were rubbing. Now there is a 3" gap.
southsoundtree
Been here much more than a while
- Location
- Olympia, WA
My summer employee is back to engineering school. He safely perform his first production canopy raise climb overlooking the Puget Sound in his last week.
Looking again.
I am about to put a bid in on an entensive removal job. Light touch work.
Backed up with work.
Routine customers have lots of work.
Weather is turning.
Gotta run...Dr. George needs us to put a bunch of trees and pruning material on the ground so he can destress with his machines in the forest on the weekends... he liked my Mini-loader so much over the years that he bought a big, new Kubota miniloader to add to his iron Arsenal.
I haven't run my chipper in about 2 months.
Looking again.
I am about to put a bid in on an entensive removal job. Light touch work.
Backed up with work.
Routine customers have lots of work.
Weather is turning.
Gotta run...Dr. George needs us to put a bunch of trees and pruning material on the ground so he can destress with his machines in the forest on the weekends... he liked my Mini-loader so much over the years that he bought a big, new Kubota miniloader to add to his iron Arsenal.
I haven't run my chipper in about 2 months.
southsoundtree
Been here much more than a while
- Location
- Olympia, WA
Not every day means big tree climbing. We prune 3' tall Japanese maples, fruit trees (hurray for local, organic food!), ornamentals, small native trees, etc. Some days we even build a bit of forest trail.
southsoundtree
Been here much more than a while
- Location
- Olympia, WA
About 70' up
only 8-9', though I scared rather than crushed a keeper cedar. Spar top will get roughened up.
I have found a kerf is a great saw holder in the end of the spring board. Sometimes, being 3' higher is great. I would have gone a bit higher but this tree had lean, meaning cut and hop down as the tree commits to the lay.
Like many tools and tricks, springboards are rarely needed/ wanted, though in occasional situations, like a low co-dom, people often jerry-rig something to step on (ladder, machine, I've even cut steps into a 45⁰ log propped against the butt) rather than having the right tool..
Feeding my neighbor Chatlie's cow excess fruit from our trees... makes for extra tasty Charlie beef. This cow is about to birth a calf (next year's freezer filler).
only 8-9', though I scared rather than crushed a keeper cedar. Spar top will get roughened up.
I have found a kerf is a great saw holder in the end of the spring board. Sometimes, being 3' higher is great. I would have gone a bit higher but this tree had lean, meaning cut and hop down as the tree commits to the lay.
Like many tools and tricks, springboards are rarely needed/ wanted, though in occasional situations, like a low co-dom, people often jerry-rig something to step on (ladder, machine, I've even cut steps into a 45⁰ log propped against the butt) rather than having the right tool..
Feeding my neighbor Chatlie's cow excess fruit from our trees... makes for extra tasty Charlie beef. This cow is about to birth a calf (next year's freezer filler).
Last edited:
southsoundtree
Been here much more than a while
- Location
- Olympia, WA
Looking for a qualified, trainable, safety-minded all-around arborist (works all parts, like the two of us) or experience ground worker (climbing training possible). $25-50 per hour.
Looking into a new 8" chipper (that will hopefully make for 14hp (existing micro chipper), 50hp (8" small chipper with feed wheels that will be easy to move to the work with the miniloader), and the 125 hp mini-loader fed chipper that I move to the work when possibly and practical. Looking at a 7x12', 10K dump trailer to add to the options where I can get a trailer that big and heavy.
A disproportionate amount of no clean-up pruning and removals compared to average, I'm told.
A small kboom and all sizes of cable cranes are available locally.
Looking into a new 8" chipper (that will hopefully make for 14hp (existing micro chipper), 50hp (8" small chipper with feed wheels that will be easy to move to the work with the miniloader), and the 125 hp mini-loader fed chipper that I move to the work when possibly and practical. Looking at a 7x12', 10K dump trailer to add to the options where I can get a trailer that big and heavy.
A disproportionate amount of no clean-up pruning and removals compared to average, I'm told.
A small kboom and all sizes of cable cranes are available locally.
southsoundtree
Been here much more than a while
- Location
- Olympia, WA
Not our everyday problem to solve, however it's pretty routine.
southsoundtree
Been here much more than a while
- Location
- Olympia, WA
A little soft inside...nbd.
All quick, natural crotch, self-lowering, then a wood chip crash pad in the drop zone for wood chunks rather than negative- blocking over asphalt to then move the chunks from the road to the area where they will cut the rounds for a church firewood supply for charity by the homeowner.
An easy enough, solo chunk-down without collateral damage, while my employee was otherwise engaged.
Lowered this little alder off of a quickly ground-set, leather tube friction saver, an underutilized piece of gear.
A little wrap up to the day with another neighbor (all of this week's jobs are for neighbors, post-snow).
Scaleable to bigger trees!
All quick, natural crotch, self-lowering, then a wood chip crash pad in the drop zone for wood chunks rather than negative- blocking over asphalt to then move the chunks from the road to the area where they will cut the rounds for a church firewood supply for charity by the homeowner.
An easy enough, solo chunk-down without collateral damage, while my employee was otherwise engaged.
Lowered this little alder off of a quickly ground-set, leather tube friction saver, an underutilized piece of gear.
A little wrap up to the day with another neighbor (all of this week's jobs are for neighbors, post-snow).
Scaleable to bigger trees!
Attachments
southsoundtree
Been here much more than a while
- Location
- Olympia, WA
Picked this up today. New 10k Big Tex dump. 7x12x2.
Driving to Ashland, OR tomorrow to pick up my 40 hour dealer demo Morbark chipper.
Ongoing orchard restoration. This is one of many times where I've worked at the house before and after new owners.
All tree care, zero cleanup.
They've planted 12-15 more fruit trees.
Driving to Ashland, OR tomorrow to pick up my 40 hour dealer demo Morbark chipper.
Ongoing orchard restoration. This is one of many times where I've worked at the house before and after new owners.
All tree care, zero cleanup.
They've planted 12-15 more fruit trees.
Reach
Been here much more than a while
- Location
- Atglen, PA
Just in case you were not aware, your trailer picture is upside down, and the other pictures are of course sideways. The upside down picture is a new one to me, I haven't seen that issue yet.
Looks like a cool trailer though, enjoy!
southsoundtree
Been here much more than a while
- Location
- Olympia, WA
VenasNursery
Been here much more than a while
- Location
- Michigan
New threads New posts
-
test
-
-
Be honest… I used to be in the “only check when something feels off” group.
- Started by peterbooth
- Replies: 5
-
-
-
-
