DMM throw hook.

The Safeguard just came out, and definitely would be better for tree climbing.
The Lifeguard locks up reliably, but because of the spring , it releases the rope as soon as any weight is taken off of it.
Both put a bend in the rope, so you can't use a foot ascender.
 
Putting two or three pounds on the bottom of a fixed rope makes the Lifeguard engage by itself. If used in a moving rope system, the down rope would need to be tensioned by the brake hand each time.
 
Putting two or three pounds on the bottom of a fixed rope makes the Lifeguard engage by itself. If used in a moving rope system, the down rope would need to be tensioned by the brake hand each time.

I'm going to give the non-spring Safeguard a try. When rec climbing I'll use this as either a (MRS) lanyard adjuster, or as a multicender on a secondary (SRS) climbing system. I'd be hesitant to use it as a primary multicender, but as a GriGri or Trango Cinch alternative, it looks like it'll kick ass. There's a free 2-day-shipping option using the coupon code: 2DAYAIR from CampSaver.com.

https://www.campsaver.com/mad-rock-safeguard-belay.html
 
Last edited:
You sure you don't want to buy a slightly used Lifeguard?
They are compact and well made, with a aluminum handle. I'll wait for a sale to come up to get one.
 
I got my Safeguard and did some low and slow practice maneuvers using a throw hook/lanyard.

1st impression was that the moving parts rattle around a bit when unweighted. When lightly weighted, pushing down inadvertently or intentionally on the cam releases the climbing line, allowing it to slide freely in a bidirectional way. This helps when tending, but raises concerns as far as it being able to slip on the rope when inadvertently or intentionally unweighted. When properly engaged and weighted, it performs very well, as expected. I really like the compactness and the range and the feel of the metal lever. The shorter (90 degree) distance on the arm's reach, makes it easier to dial into the sweet spot. While I have not yet used this as a primary rappelling device, it seems to perform much like the GriGri and it can be a bit jerky when it initially releases the climbing line, making it all the more important to retain control with your breaking hand. The orientation of the lever makes it align in a more user friendly way than the GriGri, as well. It seemed to work well on my 1/2" Vortex and 7/16" HTP Static, even though the 1/2" slightly exceeds the recommended rope size. The device also tends much like the GriGri, and performs well in a 3:1 Rad configuration.

The Safeguard will most likely replace my GriGri2, as a multicender on my DMM Captain lanyard, for the main reason that it's all metal, slightly lighter and smaller than the GriGri, and it seems to be as good as the Cinch, while working effectively on a 8.9mm to 11mm size range of climbing lines.

The low cost in comparison to similar devices is compelling, but the device may not be as ruggedly built it and may tend to wear out sooner. I feel confident using this as a lanyard adjuster, in both a SRS and MRS, but I would not feel comfortable using this device solely as a primary multicending device, like the HH, RR, RW, or Uni. If asked whether an existing GriGri or Cinch owner might be compelled to buy the Safeguard as a replacement, probably not, unless it's time to upgrade a similar worn out device, in which case, the Safeguard is a strong contender, IMHO.
 
Last edited:
Very nice review! Sounds like they need to make another model with a cam spring that keeps it engaging the rope, the opposite of the Lifeguard, which releases when just about any weight is taken off of it. It might help to keep it engaged if there was some weight below it, to rotate the device. Or set it by hand each time you want to stop.
 
Anyone have any issues with the Bolt being too long and causing the hook to bind up? I experienced this twice today in an oak with some branches that were right one the limits for the hook. Still, twice and I started looking at it. Might have to take the grinder to it.
 
Anyone have any issues with the Bolt being too long and causing the hook to bind up? I experienced this twice today in an oak with some branches that were right one the limits for the hook. Still, twice and I started looking at it. Might have to take the grinder to it.

Nope. Did it get over-tightened? Seems like either that or a factory defect...
 
I'll snap a pic better close up of mine in the morning. I haven't messed with it at all, besides cutting off the sewn eye and splicing in a new tight eye in its place.


Nope. Did it get over-tightened? Seems like either that or a factory defect...
5b3357e69df6b5c65edc7176375e2978.jpg
 
I'll snap a pic better close up of mine in the morning. I haven't messed with it at all, besides cutting off the sewn eye and splicing in a new tight eye in its place.



5b3357e69df6b5c65edc7176375e2978.jpg

I'm guessing that what you say, or something close to it actually happened. I try to throw to areas of branches that are less tangly, otherwise the hook can get stuck and you have to traverse over on a sketchy placement. The bolt area is where it gets hung up, but I'm not sure it's actually the bolt. I think it is as likely to be the angular milled surface of the hook, the shackle eye, or the stiff area of the splice. Did you actually see the bolt stuck?
 
Yes, the orientation it was in had me scratching my head at first. So I climbed over there to see what it was stuck on. Later realizing it was the actual bolt it got hung up on when I was retrieving it. Second time to happen about 20 minutes later in a different section of the same tree again I climbed over to check no knowing what to look for so I was hanging up on the same thing.
24c28874e315a3c313f602f1bce01ace.jpg
8799a9ebbfecb289c5fddfc18c5fb483.jpg
740c8bf2b1a91cfa7fcce16589af7709.jpg
 

New threads New posts

Kask Stihl NORTHEASTERN Arborists Wesspur TreeStuff.com Teufelberger Westminster X-Rigging Teufelberger
Back
Top Bottom