Acerxharlowii
Branched out member
- Location
- Greensboro
How does it handle a 25’ lanyard?
‘Keeper’ lanyard adjuster
- Thread starter Chaplain242
- Start date
Acerxharlowii
Branched out member
- Location
- Greensboro
How about with the neat keeper?
Burrapeg
Been here a while
- Location
- Puget Sound
Yeah, I cut mine in half too and put the halves on each of my two saddles. They hold lots of rope, depending on the size of the loops of course. My longer lanyard is 32 feet and I use loops that normally don't reach below my knees. It holds it all fine, with room for the biner on the end of the lanyard too. It grips a biner as well as the rope itself.
Greg_L
Participating member
- Location
- Bloomington, IN
I have slightly less than 25' of line in my lanyard, and the Keeper manages it well. I keep the very last 3' in a loop with a prussic, and the first 3' or so in a loop between my adjuster and my snap. The rest fits comfortably in the loops of the keeper and the loops hang no lower than my knees.
Steve Connally
Been here much more than a while
- Location
- Suffolk, Virginia
I like my keeper but I use TriTech fro a lanyard. It's not the best performance on a slightly stiff lanyard. I'd think a soft lanyard would be best on the keeper. It's great for me but could be greater with a different lanyard
Greg_L
Participating member
- Location
- Bloomington, IN
I've found this to be true, too. Smaller diameter flexible lines. I run Mercury on mine, which had a break-in period but is smooth as butter now.
