Search results

  1. ARLO

    Show off them splices

    I think he did it that way because it will trash the loop on the Toss Wand if you try to pull the cover through the section where the core and cover overlap. It is too tight to fit the wand, plus the core and cover through that section at the same time, and it will fray and break the loop on...
  2. ARLO

    Show off them splices

    I used the Nice Guy Dave method for years, but have found that it is easier to just use a 32" wire fid to do the entire bury in one pull. It is much faster and easier than doing the pull in two stages. And it will save you spending a lot of bucks on a Toss Wand.
  3. ARLO

    Double rope bridge

    Thanks Phil. Guess they don't like the Globe 5000! However, with frequent replacement I seriously doubt there should be any issues. I am so paranoid I change my bridges about twice a year, and I am not a full time climber.
  4. ARLO

    Double rope bridge

    I have been using 10mm FSE Robline Globe 5000 M2 to replace the bridges on my old Treemotion. The best buy I have found for this cordage is Landfallnavigation.com. It sells for $1.57 per foot in bulk. At that price I can replace my bridges frequently and never worry about internal wear.
  5. ARLO

    Show off them splices

    Yuk, yuk! Guess I will go hang out in the garage with my ropes.
  6. ARLO

    Show off them splices

    I was just trying to get a comeback from Santiago. No luck.
  7. ARLO

    Show off them splices

    More like a bunch of sad, no-life hermits whose best friends are overweight cats!
  8. ARLO

    Show off them splices

    @39Buick, those are the same instructions I follow except that I remove the inner core half way between marks 2 and 3 instead of at mark 2. That makes the taper a little more uniform and I think it makes the bury a tiny bit easier. I don't think it effects strength much at all, as those inner...
  9. ARLO

    Show off them splices

    @39Buick, Just out of curiosity, where did you start the cover taper? Some of the older instructions I came across years ago said to measure down the rope 1.5" from the crossover mark and then count 9 piks down the rope from there before starting the taper. I don't do that. I measure down the...
  10. ARLO

    Show off them splices

    It looks to me like you probably did not taper the tail on the cover and/or core quite enough. That is why you have the slight bump about 5" from the end of the rope. It also looks like the cover is a bit bunched up where it is pulled back into the throat of the splice. These little details...
  11. ARLO

    Show off them splices

    I think as long as they keep the splice from loosening up they are all fine. And yoyoman is correct. The purpose of a lock stitch is not to add strength, it is to make sure the splice stays put. Other than that, it is all cosmetics.
  12. ARLO

    Show off them splices

    It is referred to as a "whiplock", which is a combination of whipping and lockstitching. Check out this video for a demonstration:
  13. ARLO

    What shoes do you wear for limbwalking and non-removals?

    I sent pictures of the Clip'N'Step boots to Wesspur and they sent the pictures to the manufacturer in Italy. We got a response within a day "This is a defect, too little glue between the upper and lower sole. We will replace free of charge". Nice to know that they are going to cover it! And...
  14. ARLO

    Rope runner flattens rope

    I tried the Akimbo on Vega and had issues with the cover bunching up (milking) below the device on descent. Have you noticed this? I did not have the same problem with the TAZ.
  15. ARLO

    ISC D4

    Yeah, it costs $230.00 new. My climbing buddy wants to sell so he can use the money to buy a D4 Pro.
  16. ARLO

    ISC D4

    ISC D4 with little use. $130.00 with postage paid in US.
  17. ARLO

    What shoes do you wear for limbwalking and non-removals?

    That would be my guess. I am going to see if they will replace them.
  18. ARLO

    What shoes do you wear for limbwalking and non-removals?

    Nope.
  19. ARLO

    What shoes do you wear for limbwalking and non-removals?

    Have any of you guys had problems with the soles delaminating on clip'n'step boots? I have a pair that is less than a year old and one of the soles is separating from the boot about 2" back from the toe.
  20. ARLO

    Scissors recommendations?

    I use the Clauss splicing scissors from Treestuff. They are only $20.

New threads New posts

Back
Top Bottom