Search results

  1. TheTreeSpyder

    Linear Force as a Dimension Model

    Still may seem a lot, but have taken it down from 360° of considerations to a repeating just 90, to only needing to know 15, forwards and backwards. The minute hashes/slashes on clock give the proper slants/angles. Align high noon to force reference, of the load pull etc. and read the clock. ...
  2. TheTreeSpyder

    Linear Force as a Dimension Model

    i think that when the Babylonians presented calendar, clock, circle all on one device, the lesson was/is cycle; not the separate utility functions. i can calc on the fly cos:sin ratios by minutes on the clock, from doing iron crosses staring at a clock across the gym. Vision blurred and there...
  3. TheTreeSpyder

    Linear Force as a Dimension Model

    Hey Cory!-Been getting along fine ty, even tho not still riding beloved ropes. Hope you and all t/here doing well also? . UNIVERSALLY organic change from full expression to non(e) of zero expression (full hero to flat zero) for an attribute(length, distance, speed, vibration...
  4. TheTreeSpyder

    How to Get Power from a Pulley

    yes ty, that is what i meant by ratcheting to take another purchase(inside system or to whole system) but did not finish ty in all the edits to shorten...
  5. TheTreeSpyder

    How to Get Power from a Pulley

    The Burtons/floating pulley(s) have a distance problem; whereby the floater(s) 'bottom out' before rest of system, ending full system travel. Best many times, ratchetting into sequential bollard holds as re-extend rig for next 'rope purchase'(Dr. ABoK term) from loaded to unloaded side . . i...
  6. TheTreeSpyder

    Linear Force as a Dimension Model

    cos:sine ratio/waveform show all the organic possible values for an attribute's potential between full hero and flat zero of every knot, rig, load, hinge, distance, force etc. etc. as the dimensions of organic alignment to input force and the non of non-alignment too. Yin/Yang of both sides of...
  7. TheTreeSpyder

    How to Get Power from a Pulley

    Distance and Tension force here are reciprocals traded within a force volume of distance x tension. Can imagine this trade inside a Zrig of 3xForce output (potential then less conversion tax); because force density concentrated into 1/3 distance. Can put full weight of milk jug concentrated to...
  8. TheTreeSpyder

    Linear Force as a Dimension Model

    more of thoughts as i would cut (and rig) : Almost a liquid opposite response on cross-axis direction: Compression together forces on aligned axis to center >>gives cross-axis force direction away from center >>and vice/versa of opposite direction on opposite axis (vert vs. horiz axises)...
  9. TheTreeSpyder

    Linear Force as a Dimension Model

    This is how i imagine internal tree forces, per CoG; and how the 3 fields populate, and then reflect as same into hinge after face and back cuts. As we go to further complication of sidelean; we see the same pattern broadcast Naturally per the CoG. Irregardless of how intervening human cuts...
  10. TheTreeSpyder

    Linear Force as a Dimension Model

    We see/even rate the rope to break sooner under tighter arc and/or stiffer line on host ? Can see wrinkled inner arc of rope on host sometimes, yet hyper-stretched on outside of same arc i think on smaller hosts i think. Some ,more coreless like 12's may flatten. Then, too also as this...
  11. TheTreeSpyder

    Linear Force as a Dimension Model

    Linear vs. Radial matters in all things, hear we see it in rope choice and considerations. Force displacement needs at least a single Equal & Opposite pair >>Linears give this to a single, focused axis, not the same; all around. >>Rounds give this to diffused, NOT focused, dispersed axises...
  12. TheTreeSpyder

    Linear Force as a Dimension Model

    Linear Forces etc. have 2 most relative matters: alignment and 90° crossing of totally not aligned. Most organic example is gravity as a vertical force, so then horizontal as crossing, a totally different dimension of any change than vertical. Any alignment dimension % is cosine of efficient...
  13. TheTreeSpyder

    Replace this rope?

    Best to keep one on the shelf, so there is no hesitation to downgrade and replace. . Every once in awhile a short climbing rope is handy.
  14. TheTreeSpyder

    Replace this rope?

    Best to keep one on the shelf, so there is no hesitation to downgrade and replace. . Every once in awhile a short climbing rope is handy.
  15. TheTreeSpyder

    Linear Force as a Dimension Model

    In a knot, rigging etc. just as in construction, engineering etc. All Ways and Always, deforming from support dimension (vertical under gravity load etc.) decreases reach and support expressed to that vertical dimension per the cosine scale. This answers many, many, many questions if can let...
  16. TheTreeSpyder

    rip cuts to reduce rigging forces

    On overhead rig of the long , some skinnier near horizontals would favor tighten hard by hand(including climber 2/1 and climber sweat/swig), hitchpoint a bit hinge side of CoG; and use the length as a lever stretch rope hard(from the distance of drift on hinge) as lay load into rope...
  17. TheTreeSpyder

    Undercutting hung up trees

    Always want the line angle pulling away from climber at tearoff. Mite go thru a phase that pulls back towards climber some, but at tearoff need it pulling away. . Length resistance/obstruction is at a higher leveraged position against than Dutchman, tho not as rigid. CoG is usually 'inside'...
  18. TheTreeSpyder

    rip cuts to reduce rigging forces

    In my wierld... This rigging is a transferring of force, relief in one arena to build force in another. . i assume rip cuts are faceless cuts here. Relief from back cut builds force to faceless compression side as relief cannot show as distance. Force is always a reciprocal of distance...
  19. TheTreeSpyder

    Undercutting hung up trees

    Sometimes i mite do that, faced upwards or up to rollout side; from higher leverage pull on load. Then a brace to the pulley support tree, higher up, in opposing direction; if can flex forward, might brace similarly to craft face, then remove brace. Very many variables, each shituation different.
  20. TheTreeSpyder

    Undercutting hung up trees

    pics plz, every shituation different; the hooks, unhooks and passers by are in different locations and directions. Where CoG is, how much Clarence to ground/ or if touching. . As Brocky lends falling into direct lean is more pressure, thus slide to side less or distributed forces to lean...

New threads New posts

Back
Top Bottom