Search results

  1. sherwood7

    Crane Waiver

    Sounds like time for another crane service.
  2. sherwood7

    Looking for input on a hairy situation

    maybe a crane if you could get one to it. Were you thinking of rigging it with a guy line on, or using the guy line to keep it on the hinge while you flopped it? Sounds hairy, glad you could get the bucket to it.
  3. sherwood7

    Challenging rigging job

    Nice job on the rig. I'm working with Levi and his van tomorrow. I'll bring some black spray paint for the windows, that should make it way less creepy.....
  4. sherwood7

    How small of top will you climb into?

    Nothing wrong with backing up your TIP by using the structure of the tree while ascending. This comes into play much more with single line and a base anchor. If you have a shitty TIP even with a larger branch underneath to "back it up" it can go bad. If the shitty TIP breaks the rope might only...
  5. sherwood7

    How small of top will you climb into?

    When tying in a lot depends on how much horizontal(maybe lateral is a better term) movement you are going to be doing off a tie in point. You can tie in to something pretty small if u are going to be moving straight up or down. Basically how much leverage are you going to be putting on your tie...
  6. sherwood7

    Fresh Cuts

    nice work. Shout out to the aerial lift of conn rear mount, love that bucket.
  7. sherwood7

    NATCC 2015

    Should be a good time. Ill be around as well. Lets grab a beer.
  8. sherwood7

    NATCC 2015

    ill be there.
  9. sherwood7

    Old White Oak with TearTear

    def looks like white rot. How much of the stem was left intact? cable might help, even if angles are not great. Just for a little piece of mind because of the rot. As usuall hard to tell from the pics. I am sure you have it covered, you have prob done this a couple times...;)
  10. sherwood7

    Riggers Choice

    just like it for using slings instead of tying knots. have not noticed any milking issues
  11. sherwood7

    Belayed speed climb stabbing

    No joke. Glad ur ok Jon. U should come out the the natcc, but bring a shiv. We keep it gangsta in co.
  12. sherwood7

    Riggers Choice

    Not really sure. Think ur right about the last bit that doesn't get used as much. If u get the 14m def get a spliced eye.
  13. sherwood7

    Riggers Choice

    Yes sir
  14. sherwood7

    Hiring 3 to 5 climbers in Lakewood, CO

    Yep, unless ur name is John Denver
  15. sherwood7

    Hiring 3 to 5 climbers in Lakewood, CO

    I here ya, traffic is Geting pretty insane.
  16. sherwood7

    Riggers Choice

    I have the 14m and the 16m mike. They work pretty good. Only problem is they tend to kink up pretty bad especially on the porty.
  17. sherwood7

    Hiring 3 to 5 climbers in Lakewood, CO

    Great place to work.( I work there) come on down Levi, we will show u what's up.;)
  18. sherwood7

    Rocky Mountain Buzzers

    NATCC should be a good time. Looks like I will be head judge for speed climb, so come on by and say hi. I also judged the masters atRmtcc, ray had a great climb. I thought he took it. No disrespect to the other climbers.(y)
  19. sherwood7

    How to efficiently estimate a job!!

    I agree Royce. I think a flat per man hour rate with equipment costs built in is the best way to go. Cause like u said even if the equipment is not on the job it still has to get paid for. This system also seems to be the most simple way to cost jobs quickly. If u cost all the equitment...
  20. sherwood7

    Calculation of pic weight accuracy

    ↑ yep, it's like 400lbs

New threads New posts

Back
Top Bottom