Merle Nelson's latest activity
-
MMerle Nelson replied to the thread Euro tracked chippers..Interesting lift and lower of feed table itself. Wouldn't care to be lifting brush up to feed it at a downward angle. Could see that...
-
MMerle Nelson replied to the thread Euro tracked chippers..Remote control for tracking! Levered handle to open spring infeed tension apparently. I've always wondered if that would be useful on...
-
MMerle Nelson replied to the thread Euro tracked chippers..Appear to be some other youtube vids also.
-
MMerle Nelson replied to the thread Euro tracked chippers..You're close enough to be a great starting point, thanks. Between your picture and the spec of something like 26 yards per hour capable...
-
MMerle Nelson replied to the thread Euro tracked chippers..Someone will love that thing. Wish specs said the actual max feed height and width. At first I thought it was a Vermeer pictured and...
-
MSaw this at the Mini Loader booth at Ohio Tree Care Conference...
-
MMerle Nelson replied to the thread Chipper drum failure.Ha, I missed that this was a different chipper.
-
MMerle Nelson reacted to 27RMT0N's post in the thread Bandit Chipper possible options - and why. with
Like.
It's always interesting (and not really surprising) to me how different peoples use-cases are for equipment. For me, the winch on my... -
MMerle Nelson replied to the thread Chipper drum failure....then turned down on a lathe for reasonable smoothness and checked at increasing RPMs for balance until it can run smoothly at full...
-
MMerle Nelson replied to the thread The Akimbo 2.Good info. I do a lot to avoid sap as a result of using the A1 for years. And I am fortunate to have almost all of my work light on...
-
MSo, had my first not so hot experience with AK2 and sap to any degree on a 70' black spruce. The tree was kinda dry till about 2/3 of...
-
MMerle Nelson replied to the thread Chipper drum failure.Sounds affordable...balance could be an issue that will need to be addressed.
-
MUsed the grapple truck to pull the drum out, had to cut off one bearing, otherwise it went smoothly..got the drum back from weld shop...
-
MMerle Nelson replied to the thread The Akimbo 2.Always surprised to hear of people having problems with usage since my A1's and my A2 all ran well right off the bat, switch between...
-
Mpics please? thanks
New threads New posts
-
test
-
-
-
WTCW - Advanced Tree Climbing Workshop & Whales!
- Started by WTCW
- Replies: 0
-
F450 surplus auction ambulance as equipment truck and tow vehicle???- Started by southsoundtree
- Replies: 9
-
WTCW Aerial Rescue & First Aid (with ISA Texas for ISA CTC Prep)
- Started by WTCW
- Replies: 3
-
