Recent content by Finky198

  1. Finky198

    Petzl Adjust as a lanyard?

    I am liking the bridge adjust so far during basic testing. It’s super simple and fairly compact. It’s there but not in the way.
  2. Finky198

    Petzl Adjust as a lanyard?

    I just picked up the petzl bridge adjust and some open rings to convert my early model Sherrill Edge harness to dual bridge setup, with one adjustable and the other fixed. Plus I will now have useable hip rings. I have not decided how exactly I plan on using it. Possibly how you are talking with...
  3. Finky198

    vvvvvvvvvv

    Zing-it 2.2mm Weaver 12/16oz bags and a Big Shot w custom trigger and pulleys. Line is stored in a customized 3gal bucket.
  4. Finky198

    Gri Gri for ascent on SRS?

    I use a gri gri in a rads system as part of a long multi purpose lanyard, And a petzl ID in rads for my main climbing system. I have no complaints it’s not necessarily the fastest or most efficient but very effective for my uses... I agree with Brocky the gri gri is a bit tight on bend radius...
  5. Finky198

    Trimming a Neighbor’s Tree

    I always make it a point to mention during estimates that you must speak to the neighbors about trees that are shared or not yours. Most take care of it, sometimes neighbors even come outside to discuss. Other times I will drop a note with a card, That if they have any questions or concerns...
  6. Finky198

    Akimbo. Easier to see the settings.

    I have about 150 or so wrenches and 750+ sockets that are all nail polished they are color coded for easy ID it has worked really well and lasts a long time... red for SAE, blue for MET, white for impacts, green odd ball...
  7. Finky198

    WTB DMM Pinto pulley (black)

    Don't worry I have a petzl vertex vent, same color scheme same reason... As long as I can see the guys on the ground they'll survive another day... the heat is sometimes a thing tho... Best of luck in your hunt..
  8. Finky198

    Maintaining sharp chains on the work-site

    I carry a small tool box, filled with freshly sharpened chains 2 for each bar size, bar nuts, plugs, fuel filter, extra scrench’s, carb adjuster, stump vise, files, and a timberline sharpener. What ever keeps things moving on the Jobsite is the best solution.... Occasionally I will touch...
  9. Finky198

    Spiking boots?

    I saw them in the new catalogs. They’re on my list and will be the last piece to the puzzle...
  10. Finky198

    Spiking boots?

    I will agree with Brandon... I have three pairs of Hoffman’s one pair of leather pole climbers which are my goto for all of my spur work... and 2 pairs of winter pac caulks. They are by far the best boots I’ve ever worn... tough, comfortable, warm, reasonably priced and made in the USA. What’s...
  11. Finky198

    Saved by the lanyard

    I've had similar instances with lanyards over the years, gaffing out and sliding down. But I've always recovered before impact... The easiest solution was to use an extra prussik and carabiner on your lanyard as a cinch around the stem... early on, I repelled out of maybe a 40ft er...
  12. Finky198

    Throw line

    It won't get you a ton of tension, but with the rope and a Porta Wrap only you can still get a 3-1 with capture. You tie off the tree (being removed) tail goes through PW leave some slack tie an alpine butterfly aprox 10-30 ft in front of PW. This distance depends on the intended pull length...
  13. Finky198

    Omni block 4.5

    By recently acquiring a 3/4 CMI Block, in addition to our other big cmi, I now have a great set up for that although we haven’t tried it yet. We’ve done it a few times with the smaller 5/8” block. Thanks for the refresh. I am going to try an implement that on an upcoming job with the bigger...
  14. Finky198

    Omni block 4.5

    I don’t have to do it to often, but sometimes well take out a large limb 16-20”dia or even a full lead in the 2500lbs range in one piece especially from a oaks with overhead rigging. 5/8 stable braid 2 spider leg balancers. I probably should and will get a 3/4” line for jobs like that, but I...
  15. Finky198

    Omni block 4.5

    Safe working load includeds the total force of the system. Based on the manufactures tensile strength or ABS at a set rating usually 10% or 20% 10-1 or 5-1 sometimes it’s 4.5-1 others it’s 7-1 each piece has different engineering to it. There is in my op a safety factor built into their design...
See more

New threads New posts

Kask Stihl NORTHEASTERN Arborists Wesspur TreeStuff.com Teufelberger Westminster X-Rigging Teufelberger
Back
Top Bottom