davidwyby's latest activity

  • D
    davidwyby reacted to Muggs's post in the thread Work Photos with Like Like.
    Contracting today with the lift. Went full redneck on this setup.
  • D
    davidwyby replied to the thread Today.....
    Whacked a couple trees and saved a fallen camper
    • 2231140759918969653.webp
    • IMG_0116.webp
  • D
    davidwyby reacted to Friedrich's post in the thread Work Photos with Like Like.
    we removed some larger poplars and alder with alot of backlean (to a house). 2:1 pulled with the 1,8t petrol winch worked fine but i...
  • D
    davidwyby reacted to Friedrich's post in the thread Work Photos with Like Like.
    also hit my falteimer because i cut off one corner of one alder. very glad that this was the only thing that got smashed.
  • D
    davidwyby replied to the thread Work Photos.
    Ok
    • IMG_0097.webp
    • IMG_0098.webp
    • IMG_0100.webp
    • IMG_0101.webp
    • IMG_0104.webp
  • D
    davidwyby replied to the thread Work Photos.
    Parts of this thing were trying to get the house. Tree should just go but wherever. Stopped for photo op.
    • IMG_0071.webp
    • IMG_0072.webp
    • IMG_0074.webp
    • IMG_0075.webp
  • D
    davidwyby reacted to Matias's post in the thread Do I quit the best job I ever got? with Like Like.
    That had been my plan when I first got started, but California basically ended contract climbing within the state. The onlh way to do it...
  • D
    davidwyby replied to the thread Today.....
    He doesn’t mess around cutting firewood.the did this today, I pretty did down only, and bucked until I ran out of gas.
    • 1000008423.webp
  • D
    davidwyby replied to the thread Today.....
    The first larger one on the left you can see didn’t hold hinge at all. I estimated correctly on the pull angle and gun compensation.
  • D
    davidwyby replied to the thread Today.....
    Two if you swipe over. Dead…they tend to be hollow rotten brittle untrustworthy. Fear of breakage. 15k winch on a hill. Back and side...
  • D
    davidwyby replied to the thread Today.....
  • D
    davidwyby replied to the thread Today.....
    Aircraft or mechanics safety wire Very tough
    • IMG_0029.webp
  • D
    davidwyby reacted to oceans's post in the thread Today.... with Like Like.
    I feel like all wheelbarrow tires should be made of solid rubber with proper “inflated” feel. There’s nothing quite like the seldom used...
  • D
    davidwyby reacted to southsoundtree's post in the thread Today.... with Like Like.
    The inside of the dump truck door is dirty . Have you tried cutting hinges to reduce barberchairs? Alders are spicy!
  • D
    davidwyby replied to the thread Today.....
    It held a few hours Then it let go while I was sitting by the bbq, thought it was gonna explode and kill me, but it was just the tire...
Show older items

New threads New posts

Back
Top Bottom