Bart_'s latest activity

  • B
    I remember when I first saw Matt's cart up an incline groundie that I wondered about the creation of the big, largest(?) first load...
  • B
    Bart_ replied to the thread Nerd Alert.
    I knew I saw it somewhere. I finally relocated Coach Stribeck's ;) presentation of his graph. Warning, for some this never happened...
  • B
    Bart_ reacted to Muggs's post in the thread Nerd Alert with Like Like.
    @Bart_ I realized another factor with pulley efficiency many years ago when setting up a climber zipline, and that is, small diameter...
  • B
    Bart_ replied to the thread Nerd Alert.
    As a kid we were building upside down "slider chopper" trikes, bicycle trailers and such. It was cheap junk, no bearings, all bushings...
  • B
    Bart_ replied to the thread Nerd Alert.
    Rope Bend Losses or Bushing Friction Losses These two factors both undoubtedly contribute to losses that create the tension ratio of a...
  • B
    Seems like too much to me - 10% and 25% losses on parts of the rope being ok (Ghostice's Samson link). Based on that a spiking doesn't...
  • B
    Bart_ replied to the thread Nerd Alert.
    Porta-Wrap Calibration Been scratching my head on this since a thread on porty nomenclature came up. As a device the porty is a pure...
  • B
    One other aspect - Dynamics Let's take an example porty that works a bit better than the BMS at 2 1/2 wraps - let's say it achieves a...
  • B
    I found this in a 2023 post of mine: " Courtesy of Kenny I'm more aware of the non-linear nature of wraps. They're exponential. A...
  • B
    I'll bite. Which vaccine causes which cancer? HPV vaccine causes cervical cancer? Only connection I've heard. Smoke byproducts and...
  • B
    All my first double whip lowering was done off natural crotch and stubs. It seemed inescapably logical to do. Then I realised you...
  • B
    When I am not cutting And catch/ lower/ landing the 'work', my common plan is for the groundworker to catch the load, them pass the load...
  • B
    Chart might have been Dan Thornton. Wasn't Treespyder. Maybe on a BMS spool thread.? Spool has three different wraps settings whIch I...
  • B
    IIRC someone posted a chart of tension ratio (weight of log / pull force at groundie's hands) for different porty wrap configurations...
  • B
    Bart_ replied to the thread Courant Kalimba.
    I once R+D'ed pure parallel fiber "tendons". Holy no stretch Batman. Spectra, vectran and kevlar. Nothing wanted to "glue" to the...

New threads New posts

Back
Top Bottom