What’s your favourite lanyard set up

One of the challenges of a double-ended lanyard is that typically it's built on a traditional 4 or 5 wrap prussik. What's good is the prussik holds in both directions. What's bad is that the prussik binds on loading and can be difficult to release one-handed.
-AJ

What is the solution for a hitch that holds in both directions, but doesn't bind? Mirrored hitches with the attachment in between?
 
What is the solution for a hitch that holds in both directions, but doesn't bind? Mirrored hitches with the attachment in between?
https://treetools.co.nz/brands/shizll/shizll-easy-balancer-big I've used my own version of this as a balancer and pasted around with it for a lanyard and 2 sperate lanyards is probably easier in the long run.

Mostly though I'd rather use my climb line as a second lanyard if needed and bring a second climb line in the tree
 
What is the solution for a hitch that holds in both directions, but doesn't bind? Mirrored hitches with the attachment in between?
I run two mirror identical lanyards daily, 12' left and right, 24 strand climbline, hitchcord. and micropulley. always tied in and always got nice positioning. works well with spurs or srt.
 
I use two lanyard set ups that I'm quite happy with. Havent had a need to change in some years now. Just replace

First is my removal lanyard. Sterling Tech 125 with ISC Rope Grab, CT snap off of an old Grillon lanyard (my favorite snap by far). Rated 6mm Prussik with magnet for tidyness/storage on saddle. Also I can slip a carabiner in the prussik for a quick 2 in 1 lanyard when needed. The Tech 125 is stiff and good in hand for flipping and the Rope Grab works good in Pitchy conditions.

Second is Pruning Lanyard. Just some left over Yale 11.7 line, Pinto Pulley and prussik. Same CT Snap. Rated Prussik to make 2 in 1 lanyard and storage on saddle once again.
 

Attachments

  • IMG_6420.webp
    IMG_6420.webp
    514.4 KB · Views: 13
  • IMG_6421.webp
    IMG_6421.webp
    498.2 KB · Views: 12
I use two lanyard set ups that I'm quite happy with. Havent had a need to change in some years now. Just replace

First is my removal lanyard. Sterling Tech 125 with ISC Rope Grab, CT snap off of an old Grillon lanyard (my favorite snap by far). Rated 6mm Prussik with magnet for tidyness/storage on saddle. Also I can slip a carabiner in the prussik for a quick 2 in 1 lanyard when needed. The Tech 125 is stiff and good in hand for flipping and the Rope Grab works good in Pitchy conditions.

Second is Pruning Lanyard. Just some left over Yale 11.7 line, Pinto Pulley and prussik. Same CT Snap. Rated Prussik to make 2 in 1 lanyard and storage on saddle once again.
Hey, it's been a while since I've seen your name here. Made my day.
 

New threads New posts

Back
Top Bottom