Steve Connally
Been here much more than a while
- Location
- Suffolk, Virginia
11.7
This is the Akimbo
- Thread starter JMerritt
- Start date
Steve Connally
Been here much more than a while
- Location
- Suffolk, Virginia
It's a fairly firm rope I think. All my other mechanicals love it. I'm willing to but another rope just to try with the akimbo. Just want to get the rite one because I'll have to readjust every thing I own for that rope so I have to love it!
Steve Connally
Been here much more than a while
- Location
- Suffolk, Virginia
Been on cougar for years and years.
Worthaug
Carpal tunnel level member
- Location
- North Cakilaki
Steve Connally
Been here much more than a while
- Location
- Suffolk, Virginia
It is. I want akimbo and cougar to find romance!
Magnum783
Participating member
- Location
- Cheyenne WY
I have used HTP akimbo liked it good. Kernmaster was good as well. Mumford likes blue moon. I tried it on work pro at expo and that was great. Not sure it is on the market yet? Mac made mention of 12.5 work pro that would be awesome!
Steve Connally
Been here much more than a while
- Location
- Suffolk, Virginia
So Is that the 11mm kernmaster and HTP? There are multiple diameters.
Steve Connally
Been here much more than a while
- Location
- Suffolk, Virginia
I'm not a huge fan of tachyon.
monkeylove
Been here much more than a while
- Location
- Roslyn, Pa.
I have mine dial in on Prism (5T, 3B), Tachyon (5T, 3B), Yale 24 11.7 not sure what it is but (4T, 5B), and Velocity (6T, 2B). I'm about 200 w/ gear Steve.
Magnum783
Participating member
- Location
- Cheyenne WY
Frank do you still have the longer lower bollard.
monkeylove
Been here much more than a while
- Location
- Roslyn, Pa.
I have my longer lower (flat faced) and the originalupper length. Forgot the prototypes are all slightly different.
Steve Connally
Been here much more than a while
- Location
- Suffolk, Virginia
So those numbers. Looking at the holes from the inside or outside? Where is 1 in relation to what you're saying and also on the same numbering system what is more open and more closed. Like looking at a clock face. Give me a bearing I can relate to on the numbers.
monkeylove
Been here much more than a while
- Location
- Roslyn, Pa.
Sorry Steve. Outside clockwise.
Steve Connally
Been here much more than a while
- Location
- Suffolk, Virginia
So looking from outside 1 is left
Steve Connally
Been here much more than a while
- Location
- Suffolk, Virginia
Is 1 tightest or loose
JMerritt
Branched out member
- Location
- santa cruz
1 should be tightest or closest hole to the cam
monkeylove
Been here much more than a while
- Location
- Roslyn, Pa.
Steve this is my 5,3 for Tachyon.
I will be making this purchase when it becomes readily available. I have a quick question .... does anyone know if the tending shackle can safely be used for a Ddrt tie off point. Would this negatively affect operation of the Akimbo? Looks like it might be bad on decent. It would be nice to clip in like a ZZ.
monkeylove
Been here much more than a while
- Location
- Roslyn, Pa.
No it can not, yes it will. Ddrt must be done old school. At least that is my experience with it.
monkeylove
Been here much more than a while
- Location
- Roslyn, Pa.
I have a prototype but don'tthink that has changed. Hopefully Jamie will chime in if it has.
New threads New posts
-
test
-
-
-
-
Free CEUs: February 05 & March 05 - 'Urban Forestry Today' Webcasts @ Noon (Eastern)- Started by UFT
- Replies: 0
-
-
