This is the Akimbo

I would like to see how it behaves in a twin rope setup, running two Akimbos back-to-back -- particularly when working out a system for ascending two ropes at the same time. Thinking aloud, I'm not sure if something like two foot ascenders would work?

Also, I'd be curious to see how the Akimbo affects the smoothness of rope transfers ... and then there's the rescue side of things. Could the Akimbo be used for rescue? Would you need to run extra friction for a two-person load? How would it go in hauling set-ups?

I will definitely be keen to buy one when they hit the shelves, as I spend half my time in trees and the other half climbing structures in the rope access industry. It will be great to have a device that not only does both, but removes the need to switch between ascenders and descenders. Really excited.



Honestly, I'm not sure -- once they're released and I can buy one (or four!), I can let you know!

Johnny Pro on you tube bas a video "TRT" twin Rope Technique. Little bit different in that he runs two lines through a single Runner, but uses twin foot ascenders for going up.
If both of your pines are fixed at the top, and close enough together, I don't see an issue with twin foot ascenders through two distinct akimbos or other srt devices.
 
Last edited:
I'm going to hope that TreeVet was "fishing" for trouble, and read his post as such.
Based in part on his Pic, and his previous comment also.

I did invest, and I'll echo a previous comment..... If someone pulls out, I'll buy their ticket. I'd love to have supported you twice Jamie, and can't wait for this thing to land
 
Johnny Pro on you tube bas a video "TRT" Thinking Rope Technique. Little bit different in that he runs two lines through a single Runner, but uses twin foot ascenders for going up.
If both of your pines are fixed at the top, and close enough together, I don't see an issue with twin foot ascenders through two distinct akimbos or other srt devices.

Twin Rope Technique. Which is two ropes through one device, both ropes attached to one biner at the top, which permits the location of the suspension point to be moved anywhere along the axis of two high crotches. Experimental technique, is how I would characterize it.

@SoftBankHawks is probably the most knowledgeable person on this forum with regard to this technique.

DSRT might be easier and more practical for using two foot ascenders. Two ropes, two separate climbing systems. The fall of both ropes just have to be near each other. I would do this in a large oak in which I'd need to climb about 60 or 70 feet just to get to the first branch I could stand on. Once in the canopy the ropes split off and go in two different directions, at which point I'd unhook one foot ascender and pick my direction.

Tim
 
Twin Rope Technique. Which is two ropes through one device, both ropes attached to one biner at the top, which permits the location of the suspension point to be moved anywhere along the axis of two high crotches. Experimental technique, is how I would characterize it.

@SoftBankHawks is probably the most knowledgeable person on this forum with regard to this technique.

DSRT might be easier and more practical for using two foot ascenders. Two ropes, two separate climbing systems. The fall of both ropes just have to be near each other. I would do this in a large oak in which I'd need to climb about 60 or 70 feet just to get to the first branch I could stand on. Once in the canopy the ropes split off and go in two different directions, at which point I'd unhook one foot ascender and pick my direction.

Tim

Exactly.
Fixed an autocorrect error, but as I said. (Or meant to) both ropes would have to be anchored close, for use with twin feet.
I think it would work well.
 
Exactly.
Fixed an autocorrect error, but as I said. (Or meant to) both ropes would have to be anchored close, for use with twin feet.
I think it would work well.

That makes an abundance of no sense. Get up there and do the work and move on. This little contortion of metal ain't gonna remove a leader or deadwood a big decurrent white oak for you....But then aren't you are a rec climber?....nevermind.
 
78854e38ff03dc8db3ea08e37c822214.jpg
No need to apologize for others. I understand treevets impatience. It is important to hear sentiments like his if only to keep my feet to the fire. I just hope that the over long time line of this project doesn't deter others thinking of taking their ideas the gofundme route
 
That makes an abundance of no sense. Get up there and do the work and move on. This little contortion of metal ain't gonna remove a leader or deadwood a big decurrent white oak for you....But then aren't you are a rec climber?....nevermind.
So I guess this:
and this:
and this:
and this:
and this:
make no sense?

Sent from my XT1080 using Tapatalk
 
Wow 41 pages and I just can't read them all. I'll just chime in here to say I love, love, love this device. I am fortunate enough to have friends in the right places so I've been able to test drive this and also have it on display for an upcoming SRT class. My hats off to Jamie for taking the time to develop this thing - it's an engineering masterpiece, I hope the Rock E version is just as good if not better. Can't wait to see it.
 
Wow 41 pages and I just can't read them all. I'll just chime in here to say I love, love, love this device. I am fortunate enough to have friends in the right places so I've been able to test drive this and also have it on display for an upcoming SRT class. My hats off to Jamie for taking the time to develop this thing - it's an engineering masterpiece, I hope the Rock E version is just as good if not better. Can't wait to see it.
Cool, E. Have a blast at the SRT Class!
 

New threads New posts

Kask Stihl NORTHEASTERN Arborists Wesspur TreeStuff.com Teufelberger Westminster X-Rigging Teufelberger
Back
Top Bottom