Non-lockers

Since re-di's are a component of your work positioning system you can't use them. Even though the Z doesn't specifically address redi's it does say that all links need to be lockers.

Think about what would happen if any biner rolled open.

You could use two biners in opposite-opposing configuration. By the time that you rig that you'd have a locker in place. Weight to arbos comes in one or two pound increments. Rock climbers measure in grams and ounces :)

Another thing to remember is that your slings need to meet the 5,400# breaking strength. If a typical sling, which is rated at 22kN, were used in an end to end configuration it wouldn't be acceptable. In a basket is should. Girth hitch falls somewhere in between depending on the configuration.
 

New threads New posts

Back
Top Bottom