Lanyard set ups- help

[Deak]

Ok after going to the ITCC a few weeks ago I forgot something. The guys were talking about useing a different setup for my lanyard in compair to what I use now the Micro cender. As soon as someone posts it I will know the name but not the set of it.
Thanks

 

[PUClimber]

Could it be the trango cinch?

 

[Tom Dunlap]

Or this warning:

http://www.treebuzz.com/forum/showflat.php?Cat=0&Number=185707&an=0&page=0#185707

 

[BostonBull]

ART Positioner?

 

[Blinky]

Screw all that metal, use a friction hitch with a snap for a tender.

 

[Ron]

[ QUOTE ]
Screw all that metal, use a friction hitch with a snap for a tender.

[/ QUOTE ]
You know, I agree. It's lighter, bidirectional (well, if a prusik is used), inexpensive, readily replaceable, and with Blinky's solution to the tending issue, it's hard to beat.

 

[speelyei]

I used to use those hip prussiks religiously, but I got the little purple micro-grab a month or two ago, and have been very pleased with it.
It's not bi-directional, but since I use a split tail rig, that's not much of an issue. It operates even when it gets full of pitch, too.

 

[Eric_E]

[ QUOTE ]
Screw all that metal, use a friction hitch with a snap for a tender.

[/ QUOTE ]

agreeded...that's my current favorite. I go the one step further and direct tie the hitch to the D ring with the rope through the D as a tender.

 

[Deak]

y yes that is what it was thank you all.......