Hitch hiker/2/x thread

Dan Cobb said:
Alternatively, maybe one end of the dogbone could be slotted and have some type of gate or pin that would allow the hitch cord (with a pre-tied stopper knot) to be inserted and securely retained, eliminating the need to tie it every time.
Click to expand...
I've seen this done somewhere, either a climber tinkering around or maybe it was a prototype... I forget who it was or where I saw it.
 
rico said:
Aren't you the young fella who doesnt seem to know the difference between a VT and a Knute?
Click to expand...
No i do..but even if i didnt. Id learn because i like to try new things. I just never used the vt on the hitchhiker. I have alot to learn about the hitchhiker and srt. I just started srt last summer.
 
I too like to try new things and have tried just about every hitch known to man on the HH...That all taught me that Paul, the creator of the HH, was right with his recommendation of the HH hitch. As few wraps as needed. Adjust the length of your hitch as needed from day to day...Done.. All these extra braids, tucks, twist, ect are doing is fucking up the effectiveness and efficiency of the HH...My HH setup gives a Rope Runner or BDB a run for its money in speed and slack tending, but brings that sweetness and security that only a hitch based system can offer....
 
Last edited:
Brocky said:
Here’s the dogbone better orientated with the braid in back, which doesn’t function as well as original configuration, with the dogbone being pulled more parallel to the rope than into it.
View attachment 73279
Click to expand...
From time to time I will run a 3/2 Vt with the down legs on the bone side...Not for the faint of heart, and not something I would recommend to any but the highly experienced.
 
Brocky said:
Page 18, post 354 of this thread.
Click to expand...
Interesting, but not exactly what I remember seeing.

One end of the dogbone was elongated and had a groove instead of a hole, to midline attach a hitch cord. I forget if the end of the groove had a pin or if piece rotated to lock the hitch cord in the groove.
 
Jonny said:
I consider that one of the biggest attractions of the HH. Just needs a few bucks worth of bulk cord, no eyes needed.
Not super elegant in some opinions, sure, but what a work horse!
Click to expand...

I actually, do, think that the stopper knots are an elegant as well as a practical solution. All tools will have tradeoffs, but thankfully, we have many great ones to choose from.

A hitch-based system will always need adjustability. The stopper knots are excellent for that. Being able to buy your hitch cord in bulk or change it on a whim, priceless.
 
rico said:
I too like to try new things and have tried just about every hitch known to man on the HH...That all taught me that Paul, the creator of the HH, was right with his recommendation of the HH hitch. As few wraps as needed. Adjust the length of your hitch as needed from day to day...Done.. All these extra braids, tucks, twist, ect are doing is fucking up the effectiveness and efficiency of the HH...My HH setup gives a Rope Runner or BDB a run for its money in speed and slack tending, but brings that sweetness and security that only a hitch based system can offer....
Click to expand...
Yeah see....when you say it like that i can stand behind what you say. Its all about how you say it. I too like the original hitch. But i haven't tried it yet with 3 or 4 wraps. And i will. Thank you. Someone already reccomend that to me i think it was johnny but i cant say for sure. But i do remember reading alot of there posts. And i know they know what they're talking about. And yeah thats cool because i like hybrid setups alot better thank all the mechanicals ive tried.
 
@rico, do you end up with the recommended ~1.5" (I think that's how much it is) between the bottom wrap of the hitch and the body of the HH after setting/weighting it?

When I ran it like that with the standard HH hitch, it tended so poorly that my over-the shoulder webbing strap tender would leave bruises. But the upside is that it would never fail to engage when sitting into it. I wasn't far enough along in my climbing education at the time for that not to freak me out (when it would fail to grab upon setback), so I didn't depart much from the 1.5" guideline.
 
LordFarkwad said:
@rico, do you end up with the recommended ~1.5" (I think that's how much it is) between the bottom wrap of the hitch and the body of the HH after setting/weighting it?

When I ran it like that with the standard HH hitch, it tended so poorly that my over-the shoulder webbing strap tender would leave bruises. But the upside is that it would never fail to engage when sitting into it. I wasn't far enough along in my climbing education at the time for that not to freak me out (when it would fail to grab upon setback), so I didn't depart much from the 1.5" guideline.
Click to expand...
Just to the 1.5 aspect. I believe its 2"
 
LordFarkwad said:
@rico, do you end up with the recommended ~1.5" (I think that's how much it is) between the bottom wrap of the hitch and the body of the HH after setting/weighting it?

When I ran it like that with the standard HH hitch, it tended so poorly that my over-the shoulder webbing strap tender would leave bruises. But the upside is that it would never fail to engage when sitting into it. I wasn't far enough along in my climbing education at the time for that not to freak me out (when it would fail to grab upon setback), so I didn't depart much from the 1.5" guideline.
Click to expand...
Retrieving some rigging gear this morning so I got a quick shot of my go-to 3 wrap HH setup...
2 inches, give or take, between HH body and the hitch crossover. Lightning fast and effortless tending....

IMG_1544.JPG
 
Brand Spanky new and not even broken in... There was word on the streets that Paul recently had an accident/injury and was talking about possibly getting out of the game... Since all the ne'er-do-wells and lowlifes I work with LOVE the HH we bought more than a few HH2's. The thought of our offspring and future generations living in an HH2 free world forced us to take bold action...

I do hope that Paul is healing up and that he continues to manufacture what IMHO is one of the single greatest climbing devices available.
 
rico said:
Brand Spanky new and not even broken in... There was word on the streets that Paul recently had an accident/injury and was talking about possibly getting out of the game... Since all the ne'er-do-wells and lowlifes I work with LOVE the HH we bought more than a few HH2's. The thought of our offspring and future generations living in an HH2 free world forced us to take bold action...

I do hope that Paul is healing up and that he continues to manufacture what IMHO is one of the single greatest climbing devices available.
Click to expand...
I bet your closet is full of toilet paper too.
 
rico said:
Brand Spanky new and not even broken in... There was word on the streets that Paul recently had an accident/injury and was talking about possibly getting out of the game... Since all the ne'er-do-wells and lowlifes I work with LOVE the HH we bought more than a few HH2's. The thought of our offspring and future generations living in an HH2 free world forced us to take bold action...

I do hope that Paul is healing up and that he continues to manufacture what IMHO is one of the single greatest climbing devices available.
Click to expand...
Yeah I been absolutely dying to get onex they e been sold out forever..
 
You must log in or register to reply here.

New threads New posts

Kask Stihl NORTHEASTERN Arborists Wesspur TreeStuff.com Teufelberger Westminster X-Rigging Teufelberger
Back
Top Bottom