Bandit issues

[TreelineNH]

I would let you borrow my old one but its having a new headgasket installed as we speak

 

[Keenanlog]

Thanks Tom. It's working just glow plugs arent cycling and tach isnt working. Could be worse I guess.

 

[craneguy1]

Have you checked the mag pickup and related wiring?

 

[Trevor Balgavy]

Did you install the tach or did someone else? It may not be programmed correctly or it might not be getting signal. Does the white wire from the tach go to a tach probe or the alternator or?

 

[LOR tach Guy]

So, I finally have my chipper back! It was a bad injection pump and chipper side computer/wire harness (not sure the proper term). Now my issue is I have a new LOR PDC-X that I cannot get to work properly I have power, it reads battery voltage, does not read rpms. I just stays at zero during any operation. Anyone have any experience with these? Thanks!

Sorry to hear your having problems, LOR Tach Manuals can be found on their website : http://www.lormfg.com/downloads. For help working through issues with your LOR tach their phone number is 866.644.8622 , ask for Kent.

 

[Keenanlog]

Sorry to hear your having problems, LOR Tach Manuals can be found on their website : http://www.lormfg.com/downloads. For help working through issues with your LOR tach their phone number is 866.644.8622 , ask for Kent.

Thank you!