An angry little bumble bee - MS150TC

treegongfu · Apr 29, 2016

blsnelling said:
That part is not available individually. You'll have to replace the whole carb. Is yours a C1Q-S262 or C1Q-S200?

That is bad news!

Brad, I'm not even sure I had to remove it to pull the carb. The choke lever didn't want to pull off the bar so I unscrewed the screw holding the butterfly valve to remove it.

Did I need to do that?

treegongfu · Apr 29, 2016

blsnelling said:
Use a pair of diagonal cutters and flare the tip of that screw so that it can't back out.

Cheers Brad，

I`ll do that.

Thank you for sharing your expertise.

blsnelling · Apr 29, 2016

treegongfu said:
That is bad news!

Brad, I'm not even sure I had to remove it to pull the carb. The choke lever didn't want to pull off the bar so I unscrewed the screw holding the butterfly valve to remove it.

Did I need to do that?

No. The choke arm will pull/pry right off.