A300 Bobcat all wheel steer 2004 1794hrs

Machine has turf tires, High Flow for auger , stump grinder or other attachments that require high flow hydraulics . Lifting capacity is 3000 pounds 10 and ½ high . It can pick up 5000 pounds just have to keep it close to the ground. Hours on the machine are 1794 hours .Machine has oil changed every 200 hours .Machine greased as needed.Fuel filter changed 4 times a year .Machine has pilot joy sticks .Can go from skid steer mode to all wheel steer with flick of the switch .It has quick attach so switching from attachments can be done from the cab .Full enclosure cab with heat .It has special windshield lexon for example if your stump grinding would not break windshield .This machine has never been used to dig .Only snow plow and move wood or chips .Wind shield wiper motor is new .Selling it with kage snow plow 8 foot which was purchased November 2013 . Kage only used one season .Kage snow plow can go from snow pusher to snow plow in 5 seconds.Its a money maker was making $150.00 an hour with that plow .Also selling with the machine skid steer hitch ,Forks and 1 yard bobcat snow bucket with new cutting edge .Also selling with 2007 ryans grapple best grapple on the market opens 60 inches .I have many pictures of different uses the attachments provide. With the grapple I used it to move logs ,brush move my chipper and 14 foot dump trailer. In the pictures you can see 2 piles of logs that I loaded my dump truck with the grapple. Saves space. I am stream lining my business and have a mini skid steer with grapple that I use also use so I don’t need this machine. Hydralic filter and fuel line recently done. Machine runs tight 81 horse power Kubota engine .Most of the hours are snow . No Leaks . Good thing about all wheel steer is less tire wear. This is a awesome powerful machine especially with the attachments .This machine alone new is around mid 65,000 thousand.No leaks.There is a picture of my truck with 18 foot long body loaded wood into the truck in 20 minutes. I bought this machine from Bob cat MA with 450 hours. It was used to load chips at a nursery and was not used to dig and came with turf tires that’s big reason I bought it. I am located in Norther New Jersey.Machine is sold as is. Grapple new is over 10,000 with tax and shipping.Forks new 950 , hitch for moving trailers or chipper 875 new. Kage over 6200 with shipping and tax.This machine has low hours. I worked with heavy equipment in rock quarry back in 90s so I know how to take care of a machine.I am adding free 6 ton millennium trailer.You can see machine picking up large red oak with forks on www.youtube.com
 

Attachments

  • DSCN5853.webp
    DSCN5853.webp
    300.8 KB · Views: 49
  • DSCN5861.webp
    DSCN5861.webp
    340.3 KB · Views: 48
  • DSCN5865.webp
    DSCN5865.webp
    297.1 KB · Views: 46
  • DSCN5881.webp
    DSCN5881.webp
    298.4 KB · Views: 47
  • DSCN5886.webp
    DSCN5886.webp
    351.6 KB · Views: 46
  • DSCN5894.webp
    DSCN5894.webp
    301.5 KB · Views: 47
  • DSCN5900.webp
    DSCN5900.webp
    299.3 KB · Views: 51
  • DSCN5909.webp
    DSCN5909.webp
    376.8 KB · Views: 48

New threads New posts

Back
Top Bottom