here is the video
http://www.mrstartup.com/truck.wmv my truck
I have a 1985 one-ton dump (chip box) that runs like a top. This is the truck that I pull the bandit around with. It has a strong 454 gas in it. It shows around 70K miles. I would have zero worry pulling a chipper to anywhere in the continental US.
Asking $5750
With the prices I am asking for this gear you could easily fly in, drive home, pay for gas hotel and food, and still be less that the cost ot the same chipper elsewhere.
Also I am selling my 1999 bandit 1890. It has the diesel 116 Cumings, single axel.
The machine runs very well. I have had no problems with it. I am just getting out of the tree business.
The known problems with the machine is that it has an oil leak, and the tach is not functioning properly, so it does not have the auto feed. I priced this out at bandit and they are $200. Also it needs a volt meter.
Asking $18,500
You can call me at 1-800-TREE-EXPERT.
LEAVE A MESSAGE, as I am not currently answering that phone.
Or you can email me at tfmarketing@gmail.com
The truck is located in Colorado Springs, CO
here are some pics of the stuff
www.mrstartup.com/truckpics/back_passanger_chipper.jpg
www.mrstartup.com/truckpics/Chipper_drivers_90_degree.jpg
www.mrstartup.com/truckpics/Chipper_drivers_side.jpg
www.mrstartup.com/truckpics/chipper_motor.jpg
www.mrstartup.com/truckpics/truck_dashboadr.jpg
www.mrstartup.com/truckpics/truck_drivers_side.jpg
www.mrstartup.com/truckpics/Truck_motor1.jpg
www.mrstartup.com/truckpics/Truck_motor2.jpg
www.mrstartup.com/truckpics/truck_speedo.jpg
www.mrstartup.com/truckpics/Truck_tire_tread_front.jpg
www.mrstartup.com/truckpics/Truct_tire_tread_rear.jpg
www.mrstartup.com/truckpics/Trudc_back_drivers.jpg
www.mrstartup.com/truckpics/turck_inside_passanger.jpg
www.mrstartup.com/truckpics/view_from_top_of_chip_box_at_secret_tool_box_above_cab.jpg
http://www.mrstartup.com/truck.wmv my truck
I have a 1985 one-ton dump (chip box) that runs like a top. This is the truck that I pull the bandit around with. It has a strong 454 gas in it. It shows around 70K miles. I would have zero worry pulling a chipper to anywhere in the continental US.
Asking $5750
With the prices I am asking for this gear you could easily fly in, drive home, pay for gas hotel and food, and still be less that the cost ot the same chipper elsewhere.
Also I am selling my 1999 bandit 1890. It has the diesel 116 Cumings, single axel.
The machine runs very well. I have had no problems with it. I am just getting out of the tree business.
The known problems with the machine is that it has an oil leak, and the tach is not functioning properly, so it does not have the auto feed. I priced this out at bandit and they are $200. Also it needs a volt meter.
Asking $18,500
You can call me at 1-800-TREE-EXPERT.
LEAVE A MESSAGE, as I am not currently answering that phone.
Or you can email me at tfmarketing@gmail.com
The truck is located in Colorado Springs, CO
here are some pics of the stuff
www.mrstartup.com/truckpics/back_passanger_chipper.jpg
www.mrstartup.com/truckpics/Chipper_drivers_90_degree.jpg
www.mrstartup.com/truckpics/Chipper_drivers_side.jpg
www.mrstartup.com/truckpics/chipper_motor.jpg
www.mrstartup.com/truckpics/truck_dashboadr.jpg
www.mrstartup.com/truckpics/truck_drivers_side.jpg
www.mrstartup.com/truckpics/Truck_motor1.jpg
www.mrstartup.com/truckpics/Truck_motor2.jpg
www.mrstartup.com/truckpics/truck_speedo.jpg
www.mrstartup.com/truckpics/Truck_tire_tread_front.jpg
www.mrstartup.com/truckpics/Truct_tire_tread_rear.jpg
www.mrstartup.com/truckpics/Trudc_back_drivers.jpg
www.mrstartup.com/truckpics/turck_inside_passanger.jpg
www.mrstartup.com/truckpics/view_from_top_of_chip_box_at_secret_tool_box_above_cab.jpg
