Search results

  1. Kevin

    Rubber for bigshot

    Well done Dan; Thanks for taking the time and making the effort to post that information.
  2. Kevin

    Rubber for bigshot

    Sorry, too late Tom, but thank you just the same. I used that link from Amazon and did a search on ebay and found 25ft. for 1.60 ft. I only had 6 hours to bid and make the purchase. I can now make them any length I choose and use the old pouch that works for me. This last set broke at the hole...
  3. Kevin

    Rubber for bigshot

    That's great, thanks guys.
  4. Kevin

    Rubber for bigshot

    I did that yesterday AJ, no luck. All the tubing I found was less than the size required.
  5. Kevin

    Rubber for bigshot

    Anyone have a link or reference to bigshot rubber tubing? I've been searching and can't find it. I hate the new pouch so I'll make my own, I just need a few meters of tubing.
  6. Kevin

    Using trunk to make table tops

    Timber Kings rout out the bottom side and replace it with glue and plywood. I placed a couple of large cookies on my sawmill to get them even and that works really well. Wood will take one inch per year to dry.
  7. Kevin

    Big Shot pouch catching on pole section edge when fired

    I cut the new pouch off and restitched the old pouch on the new rubber, problem solved. They took something that worked well and rendered it useless.
  8. Kevin

    Tree trimmer killed by power lines in Southfield

    https://www.clickondetroit.com/news/tree-trimmer-killed-by-power-lines-in-southfield
  9. Kevin

    Portable Winch....best winch line?

    I use 1/2 inch stable braid.
  10. Kevin

    T540 Oil leak

    If the cap isn't leaking it could be the tank vent or the line at the oil pump is leaking. You can remove the rubber line at the pump, clean the pump and line with alcohol then use a gasket sealer and reinstall the line. The tank vent can be replaced. If you use compressed air to clean your saw...
  11. Kevin

    MS 660 running rough

    What was wrong with the plug? If the saw was running rich and fouling the plug then it's likely to happen again.
  12. Kevin

    TIP Failure

    Trees here are very dry, the branches break easily, like match sticks. Was the tree dry?
  13. Kevin

    Dies on throttle up

    Is the spark arrestor plugged with carbon?
  14. Kevin

    Stihl hard starting

    Sounds like it's flooding. Carb kit and/or carburetor adjustment.
  15. Kevin

    Where are they now?

    Here's a little something from the past. YouTube won't allow the music but the video still works.
  16. Kevin

    please help me figure out what to do with my ms660

    If you have dirt past the air filter the carburetor will be plugged.
  17. Kevin

    Climbing a tree with lean

    If you don't climb on the high side then you risk cutting out. Your flip-line will have a tendency to drop but you won't cut out.
  18. Kevin

    looking for used wraptor

    I have used my GRCS.
  19. Kevin

    Burnt up sprocket nose on a new 42" bar

    Which bar and chain combo do you want to end up with, 3/8 or .404?
  20. Kevin

    Burnt up sprocket nose on a new 42" bar

    The nose sprockets are the same for all gauges of chain. What you have is .404 pitch chain going around a 3/8 pitch sprocket = burnt tip.

New threads New posts

Kask Stihl NORTHEASTERN Arborists Wesspur TreeStuff.com Teufelberger Westminster X-Rigging Teufelberger
Back
Top Bottom