Search results

  1. cedar

    Mini skid vs articulated loader

    I have a Swinger articulated loader and DW mini-skid. I rarely bring the Swinger to the job due to access and the steep terrain where I live. It's also easier to load the mini-skid on a dump trailer and head to the job. I've thought about selling the Swinger to try a 60 or 70 hp track loader for...
  2. cedar

    Stump Slayer Mini Skid Attachment

    This is the 30hp kohler model. I have owned it for 5 years and there are less than 300 hours on the attachment. I switched the teeth over to greenteeth last year. I will post more pictures this week. It is in good mechanical condition. Asking $3800.
  3. cedar

    '99 International dump truck

    Where are you located?
  4. cedar

    Isuzu NRR Chip Truck

    Evan, thanks for posting the pictures of your truck. What is the empty weight of your truck with the switch-n-go and chipper body. I think a higher GVW cabover with a 6-cylinder diesel would work better with the hills and steep driveways in my area. But Isuzu, Fuso, and Hino no longer make a...
  5. cedar

    Isuzu NRR Chip Truck

    I appreciate the advice. I may be able to finder a larger, used hook lift truck in my budget.
  6. cedar

    Isuzu NRR Chip Truck

    Royce, you may be right. But I've done pretty well with smaller trucks like an F550 and the NRR seems comparable.
  7. cedar

    Isuzu NRR Chip Truck

    I am looking into buying an NRR with a hooklift. If it all works out, I will start with a 12 foot dump body and then add a chip box later next year. It will have a tow hitch so can pull a dump trailer or chipper.
  8. cedar

    Isuzu NRR Chip Truck

    Thanks for the reply and photo. How does the truck do when pulling a loaded trailer?
  9. cedar

    Isuzu NRR Chip Truck

    I am looking to purchase a new chip truck and am thinking of going with an Isuzu NRR. I've seen a few posts on cabovers but none on this model truck. Anyone have experience with the NRR. Also, any recommendations for a manufacturer of chip bodies for a cabover? Thanks
  10. cedar

    Ditch Witch SK755

    I have a 755, not one problem with 400 hours on the machine. It's great and can move some fairly large wood. I'm thinking of selling my articulated loader since it never leaves my shop.
  11. cedar

    2001 Ford F550 4x4 Diesel Chip Truck

    I can double-check the wheelbase but I know the cab to axle measurement is 84". The chip box is 12' long and the truck has a GVWR of 19,500.
  12. cedar

    2001 Ford F550 4x4 Diesel Chip Truck

    This truck has the 7.3 diesel, 4 wheel drive, 170k and a manual transmission. The box and hoist were installed by Schodorf Truck Body in 2009. Asking $24000 or best reasonable offer.
  13. cedar

    Rayco RG40

    I am looking to buy a new stump grinder and am interested in the Rayco RG40 tracked machine. It has a 40hp subaru gas engine. Anyone have experience with this grinder? The dealer is about 4 hours away and there is no way to demo a machine. Thanks
  14. cedar

    WTB chip truck

    I sent you a pm
  15. cedar

    ALC Parts and Service

    Here's the truck I was interested in. It sold for 18K before I had a chance to look at it. Seems like it would have a good one. https://www.tuffwerx.com/bucket-boom-trucks/1999-international-4700?itemId=2ab97e5c-feb1-4704-b0f9-db0d0472639d
  16. cedar

    Stump Slayer Grinder

    That's too bad. I have a Terex 730 that I really like. Maybe another company will keep manufacturing the Woodsman chipper.
  17. cedar

    Stump Slayer Grinder

    Thanks, l'll measure the bearings and try to cross match. Carl, I read on arborist site that Terex will no longer be manufacturing stump grinders and chippers. Is this correct?
  18. cedar

    Stump Slayer Grinder

    Does any one know the part number or where I can order the pillow block bearings for the Stump Slayer. I tried contacting the manufacturer but they are no longer in business.
  19. cedar

    ALC Parts and Service

    Thanks for the link to Brian's parts and service. There is a warning section on the site that states the year and model that had a link failure and another model that had used the wrong cable.
  20. cedar

    ALC Parts and Service

    I am located in southwest Virginia.

New threads New posts

Back
Top Bottom