Search results

  1. VenasNursery

    Lakeside Work

    When we start a job and the minute it starts to leave a larger impact on a yard than I explained to the h.o then I immediately present the updated information to them and explain. Either we can pause your project until it dries out to complete the job under the conditions that was explained to...
  2. VenasNursery

    Dump hoist trouble shooting?

    Make sure your pins aren’t seized up or anything bent Check fluid level and if it’s clean Check pressure and make sure it’s up to specs Is this a new truck to you?
  3. VenasNursery

    Looking at a Vermeer 552

    I feel that green teeth chip containment is far worse than the yellow jackets and with the green teeth they claim you get 3 sides but I never seem to be able to achieve that vs yellow jackets I feel you get to full sides and they last a lot longer. The pockets also have more contact area with...
  4. VenasNursery

    Looking at a Vermeer 552

    Rayco stumpers are beast also
  5. VenasNursery

    Looking at a Vermeer 552

    That’s crazy but I would bet that’s happened probably on every machine made. Crank broke in half and had to get a new engine. Cummins 4 cylinder problem not a Vermeer problem 2200 hrs and not even blew a hydraulic line 85hp non def also yellow jacket teeth are far superior compared to green...
  6. VenasNursery

    Looking at a Vermeer 552

    I have a 852 and it’s a beast! 2013 though
  7. VenasNursery

    Today....

    Live and learn. Life in the fast lane unfortunately! Thanks for sharing. Under $5k would probably be better offf paying out of pocket IMO.
  8. VenasNursery

    Mobile mini crane

    Awesome machine
  9. VenasNursery

    Mobile mini crane

    Jekko makes one
  10. VenasNursery

    Bevel buddy

    Definitely not as good as a factory edge, but last us 30 days. We chip a minimum of 25 yds a day. Always machine feed. So unfortunately more rocks and dirt go through then more than we like to admit. We have a large chipper so we can run our knives pretty dull. Brand new set of knives we get 3...
  11. VenasNursery

    Bevel buddy

    I don’t think the pulling power changes and after three times of sharpening we put new knives on.
  12. VenasNursery

    Bevel buddy

    Correct you sharpen the backside or flat side of a knife. Nice thing is you can do them on the chipper and only takes maybe five minutes.
  13. VenasNursery

    Any experience with Morbark's new BVR chippers?

    We love it once our knives are dull. We use it and on average it lasts one month you get three sharpens so the edge don’t last that long but a month but a month is a month and three months is three months.
  14. VenasNursery

    Any experience with Morbark's new BVR chippers?

    Correct
  15. VenasNursery

    Any experience with Morbark's new BVR chippers?

    We use a bevel buddy and we love it.
  16. VenasNursery

    Mobile mini crane

    That could end up costing more than a crane lol
  17. VenasNursery

    Any experience with Morbark's new BVR chippers?

    Don’t know anyone running one yet. I think that new line of chippers have only been out maybe a year now and the 18” had to be redesigned because they put a 6 knife drum vs 4 knife drum and now are going back to the 4 knives. The clutch system has been around for a long time it was on the rayco...
  18. VenasNursery

    Certifications

    @Steve Connally definitely can answer questions and New Jersey Crane Experts offer training.
  19. VenasNursery

    Zonsen engines

    https://www.ebay.com/itm/176852849211 Motorcycle engines maybe?
  20. VenasNursery

    Zonsen engines

    If you google zonsen engine parts all kinds of things pop up? Not sure what you are exactly looking for?

New threads New posts

Back
Top Bottom