Latest activity

What's new Featured content New posts New media New media comments New profile posts Latest activity
  • ATH
    ATH replied to the thread Wildfires.
    I'm amazed people don't dump their insurance more over that stupid stuff. They are willing to spend more on (unnecessary - often...
  • ClimbingTN
    ClimbingTN replied to the thread Dump bed issues.
    Battery sounds low. Should be 12.5-13 with everything off or disconnected. Running voltage should be 13-15. Take it to have a load test...
  • southsoundtree
    southsoundtree replied to the thread Dump bed issues.
    It seems like wires are cheap and easy to replace. Possibly before or while changing the motor. What do you think @Reach ?
  • southsoundtree
    southsoundtree reacted to Reach's post in the thread Dump bed issues with Like Like.
    Also, don't think that you are coming across as inept. There's a difference between ignorance and ineptitude, ignorance can be fixed...
  • Njdelaney
    Njdelaney reacted to Reach's post in the thread Dump bed issues with Like Like.
    Also, don't think that you are coming across as inept. There's a difference between ignorance and ineptitude, ignorance can be fixed...
  • Njdelaney
    Njdelaney reacted to Reach's post in the thread Dump bed issues with Like Like.
    If your wire size is correct, that's a pretty considerable voltage drop. It seems like your motor is pulling too much current, which...
  • NWPEZ
    NWPEZ replied to the thread Dump bed issues.
    If you have any recommendation of companies for motor or entire unit be stoked to hear. Sounds like you’ve been down this road a few times.
  • NWPEZ
    NWPEZ reacted to Reach's post in the thread Dump bed issues with Like Like.
    Also, don't think that you are coming across as inept. There's a difference between ignorance and ineptitude, ignorance can be fixed...
  • NWPEZ
    NWPEZ replied to the thread Dump bed issues.
    Copy that. Thank you very much for the response. I assume by the bed build and welds the whole pump unit isn’t very quality. I’ll look...
  • NWPEZ
    NWPEZ replied to the thread Dump bed issues.
    Wiring is correct size but it is possible that there could be corrosion somewhere. I’ll do my best to trace lines. I don’t think my...
  • NWPEZ
    NWPEZ reacted to Reach's post in the thread Dump bed issues with Like Like.
    If your wire size is correct, that's a pretty considerable voltage drop. It seems like your motor is pulling too much current, which...
  • NWPEZ
    NWPEZ replied to the thread Dump bed issues.
    Yes 10 volts at pump under load. So I’d be looking at a new lift motor if that’s the case?
  • VenasNursery
    VenasNursery reacted to Reach's post in the thread Dump bed issues with Like Like.
    Is that 10 volts at the pump when under load? I suspect that the motor on the electric pump has worn out. If a couple of the winding...
  • NWPEZ
    NWPEZ posted the thread Dump bed issues in Rubber hits the road!.
    I’ve got a 2011 ram 5500 with a third party dump bed installed when I bought it roughly 6 yrs ago. It’s always been super strong until...
  • Njdelaney
    Njdelaney reacted to Tuebor's post in the thread Wildfires with Like Like.
    Good job!
Show older items

New threads New posts

Back
Top Bottom