Who wants it?

aaronf

Participating member
I have about 60' of 5/8th Notch Kraken. (Atlantic Braids). Will anyone splice me up a few single eye slings? Obviously, this is a paying job. The supplier will not splice anything after it leaves the warehouse.
 
I have about 60' of 5/8th Notch Kraken. (Atlantic Braids). Will anyone splice me up a few single eye slings? Obviously, this is a paying job. The supplier will not splice anything after it leaves the warehouse.
Atlantic Braids has pretty detailed & clear splicing instructions. I'd strongly suggest just taking the time to learn. It's really not that bad to get the hang of it. I think the hardest part was figuring out which tools & tips made it the easiest to work with & then how to make those tools myself. My go to is a wire fid & different size soft fids (Tech Flex sleeving for the soft & 18ga-20ga fencing wire for wire fid, whichever stays stiff enough). I really only use a tubular fids to open the cover or splice 12 strand.

Not for nothing but depending on how long your trying to make these dead eyes, 60 ft should be enough to give you a couple practice runs, just intentionally go small to save on Cordage. You'll thank yourself once you learn.

Sent from my Pixel 2 XL using Tapatalk
 
Last edited:
Thanks for the advise guys. Splicing may be in my future but not in this season of life. And yes Sherrill said it was new company policy, that when it leaves the warehouse, it may not be returned for splicing.
 
Thanks for the advise guys. Splicing may be in my future but not in this season of life. And yes Sherrill said it was new company policy, that when it leaves the warehouse, it may not be returned for splicing.

Thanks for posting that bit of information. I had not heard that before. Not that it affects me much, other than to give one more small push in the direction of learning to splice.
 

New threads New posts

Back
Top Bottom