Uni - M Method?

jmcscrap

Participating member
Location
Woodbury, MN
Just picked up a unicender and am wondering if, or how any of you have figured out a way to use the M-method with it? I like this technique and use it quite a bit, but have not been able to figure out how to incorperate it with the uni. Any help with this is appreciated!
 
I've never used the M redi with the Uni but I don't see that there is anything unique. It might work nicely using a two hole pulley on the bridge to float the two attachments.
 
Tom, Thanks for the idea, it will work if I use a hitchclimber on my bridge and run the eye of my climb line past the uni and attach to a different hole in the H/C. That leaves the middle attachment point open and easy to use for the M-direct. I guess my issue with this in ddrt is when I use the top hole in the uni to hook into the eye of my rope, and have the uni attached to my bridge with a swivel. hope this makes sense.
 
try a hms carabine on the bottom with the eye splice and the uni tied in there; put a krab on the upper attachment hole, where you normally attach the eye splice, then clip the krab to the mid line to form the m.
 

New threads New posts

Back
Top Bottom