Tenex-Tec vs Tenex-Tec Pro

Location
Wisconsin
I was browsing Arbsession and saw this new Tenex-Tec Pro. At 1/2" it has (marginally) lower average and minimum breaking strength(A difference of 100lbs ABS and 200 MBS) when compared to standard Tenex-Tec, while being slightly more expensive per foot. Does anyone have any insight on this? Is it worth the extra cents or is it just for the more flashy color scheme?
 
Interesting. When it first came out, I would have sworn that it was advertised as about 20% stronger. If the numbers you're giving here are accurate, I might order enough of each to make some dead eyes and see if they feel different in the hand.
 
Last edited:
I've always wondered about the Samthane coating since I first read about it. I couldn't materially detect any sign of it's presence on some tenex I got. My rope was red and faded to pink, seemed like an outer surface inwards progression. I never had any color abraded off its surface (?)

Strength is generally correlated with weight per foot ie quantity of material, but has some variation with construction or braid angle. Any sign of differences there?

An experiment could be to cable up the two ropes under equal tensions and measure that operating diameter and pics per foot.
 
How much does age degrade strength?

I have a bunch of low- use Tenex or T-t, and double-braid rope slings that have much more age than use.
Depends on storage conditions. I would bet that yours is in much better shape than cordage stored in a hot shed in Fresno. HowNot2 did some break tests comparing 25 year old rope stored in a cool closet vs the same rope stored in an attic for more than 10 years, though I forget how much longer. The older rope held way more load, almost certainly because it was stored in better conditions.
 

New threads New posts

Back
Top Bottom