Singing Tree Quickie out of stock everywhere.

[dsptech]

Anybody know why?

 

[bonner1040]

I do! We had to reject a set of 1000 pieces due to manufacturing issues. Looking like another month to get them.


Sent from my iPhone using Tapatalk

 

[dsptech]

Wow a 1000 pieces!
That had to suck having to inspect that many.
Were the issues affecting both the stamped and milled versions?

 

[bonner1040]

Just the cast ones


Sent from my iPhone using Tapatalk

 

[dsptech]

The milled versions are out of stock as well.
Probably due to the cast version issues.
Just my luck.
I was looking to buy a couple of the cast ones this weekend for SRT use with the HH2 I just purchased yesterday.
Finally going to make the switch over to SRT.

 

[Merle Nelson]

Thanks for rejecting them Nick and TS!!! Sorry for the issues it causes you.

 

[rope-a-dope]

The milled versions are out of stock as well.
Probably due to the cast version issues.
Just my luck.
I was looking to buy a couple of the cast ones this weekend for SRT use with the HH2 I just purchased yesterday.
Finally going to make the switch over to SRT.

The HH2 and a choked quickie anchor is my #1 set-up for removals.

 

[adaycj]

The milled versions are out of stock as well.
Probably due to the cast version issues.
Just my luck.
I was looking to buy a couple of the cast ones this weekend for SRT use with the HH2 I just purchased yesterday.
Finally going to make the switch over to SRT.

You can use mine. PM your address and I'll send it to you. You can sent it back when you get your new one. I'll pay USPS postage to get it to you if you do the same to get it back in a few months.

 

[dsptech]

adaycj,
That would be awesome!
I'll pay the shipping both ways.
PM on the way.

 

[dsptech]

Thanks for rejecting them Nick and TS!!! Sorry for the issues it causes you.

I second that.
Not so much an issue just have to be patient a little longer.
When the next batch is accepted I'll know they will be safe to use thanks to Nick and TS.

The HH2 and a choked quickie anchor is my #1 set-up for removals.

Thanks for backing up my decision on this setup.

 

[adaycj]

Mine is on the way to you. Keep it until Nick can get you what you want.

 

[dsptech]

Mine is on the way to you. Keep it until Nick can get you what you want.

Greatly appreciative of your generosity.

 

[Benjo75]

Pardon the ignorance. What are the major differences in the milled and cast versions. I use one with an Alpine Butterfly for my top tie. Are these safe to use?

 

[bonner1040]

Pardon the ignorance. What are the major differences in the milled and cast versions. I use one with an Alpine Butterfly for my top tie. Are these safe to use?

Just looks really. Same strengths.

All safe.


Sent from my iPhone using Tapatalk

 

[colb]

Pardon the ignorance. What are the major differences in the milled and cast versions. I use one with an Alpine Butterfly for my top tie. Are these safe to use?

In the past, I asked @bonner1040 if the squared surfaces on the cast version led to decreased break strength, to which the reply was, paraphrased, "no, TS break tested rope without a decrease in strength."

 

[Acerxharlowii]

I was wondering what was up. I ordered one when you had the sale.( Btw, that stock was ok?) I love it so much I want two more!!

 

[bonner1040]

There wasn't a safety issue, the batch we rejected had unacceptable tooling marks and were cosmetically flawed.


Sent from my iPhone using Tapatalk

 

[Acerxharlowii]

Cosmetic flaws? You're so fashionable