older chipper for sale

[Norsetreeman]

I can't find a number on the tongue there's a number on the cover where the clutch housing is. Can someone explain how many numbers are supposed to be in the grouping that I'm looking for any and all help would be great. Started my own business and can only afford an older chipper like this but I'd definitely like to figure out what year and model it is

 

[Norsetreeman]

If you find that number, let me know what it is and I should be able to look it up for you!

Man I can't find any number on the tongue only the serial number and model number on the motor and then I think on the clutch housing there's a number but what type of number am I looking for like how many numbers are in it?

 

[Norsetreeman]

If you find that number, let me know what it is and I should be able to look it up for you!

Alright only numbers I found that on it that are engraved into the metal is on the clutch housing cover in a tough spot to see right away. Top number is H215 and then below it is 00JJ-7500-A please let me know if those are what I'm looking for if not I'll keep looking. Thanks

 

[Norsetreeman]

Alright only numbers I found that on it that are engraved into the metal is on the clutch housing cover in a tough spot to see right away. Top number is H215 and then below it is 00JJ-7500-A please let me know if those are what I'm looking for if not I'll keep looking. Thanks

Also on the bottom of the clutch housing I found another plate with serial and model numbers with engraved numbers on either side of the plate do ya think that's what I'm looking for?

 

[Norsetreeman]

Also on the bottom of the clutch housing I found another plate with serial and model numbers with engraved numbers on either side of the plate do ya think that's what I'm looking for?

These are all the different engraved numbers I found, I really don't know what number is the one I want how many are in the sequence

 

[Trevor Balgavy]

Unfortunately that info won't do us any good as far as machine ID goes. You will need all of that info if/when you need anything for the clutch/pto though.

 

[Norsetreeman]

I'll keep looking maybe I missed it somewhere I'm going out right now to completely go over the whole chipper. Thanks for your help

 

[Norsetreeman]

Unfortunately that info won't do us any good as far as machine ID goes. You will need all of that info if/when you need anything for the clutch/pto though.

Ok man I found a four digit number on the inside of the belt cover I read in another post that's what I'm looking for, you would know for sure. It's engraved in the metal the # is 2394 please let me know asap if this is what I need thanks man and if it isn't let me know how many digits in the sequence I'm looking for.

 

[Trevor Balgavy]

Well, it doesn't give a model but it is a 1986 with a 2.3l Ford in it. Knives are $33.00 each if you need some.

 

[Norsetreeman]

Well, it doesn't give a model but it is a 1986 with a 2.3l Ford in it. Knives are $33.00 each if you need some.

Ok so it says it's a 1986 that's good to know but the motor says 4. Something liter on it can't remember off hand diesel. I think there's only two knives in it and I can definitely use a new set I'm also gonna grind the feed wheel teeth they need to be sharpened to grab better. Where can I get the knives?

 

[craneguy1]

He is landmark machinery...hence his avatar....still looks like a ford bsd 444 to me.

 

[Norsetreeman]

Ok so it says it's a 1986 that's good to know but the motor says 4. Something liter on it can't remember off hand diesel. I think there's only two knives in it and I can definitely use a new set I'm also gonna grind the feed wheel teeth they need to be sharpened to grab better. Where can I get the knives?

Ok so it says it's a 1986 that's good to know but the motor says 4. Something liter on it can't remember off hand diesel. I think there's only two knives in it and I can definitely use a new set I'm also gonna grind the feed wheel teeth they need to be sharpened to grab better. Where can I get the knives?

Well, it doesn't give a model but it is a 1986 with a 2.3l Ford in it. Knives are $33.00 each if you need some.

 

[Norsetreeman]

Ok so I ordered the knives from you guys can't wait to see how much better it will chip. Also I need to order the belt for the radiator fan and the four belts for the wheel. I noticed there's only 3 on there guess the guy ran it like that but yeah might as well get 4 new ones and adjust them correctly. Then all I need is a few odds and ends here and there and I'm good to go. I'm happy paid 3 grand for it put alittle money in to it did two jobs and it's all paid off I like the old beast

 

[Norsetreeman]

Hey Trevor I got another thing I need for the chipper. I have the end piece on chipper chute that adjusts how chips come out but I need the adjuster piece that moves it and keeps it in place. Right now I'm holding it with a vice grips which is annoying, let me know where I can get that piece if you know

 

[Trevor Balgavy]

For $187ish you could have a new flipper, handle assy, and the part it locks into. You'll just have to do a little welding is all

 

[Norsetreeman]

For $187ish you could have a new flipper, handle assy, and the part it locks into. You'll just have to do a little welding is all

What do I just weld it up onto the chute, that's exactly what I need when Im ready I'll order that,and that's from landmark machinery?

 

[Trevor Balgavy]

Yep just have to weld the rooster comb looking part to the discharge chute and the hinge of the flipper to the top of the discharge and you're good to go. And yep, it is Landmark, you can call 989-817-4586 if you have any questions on it!

 

[Norsetreeman]

Ok I also have two L brackets that hold the motor cover on mounts right onto a bolt on either side of motor there's a part number on them I'll get it tomorrow see if you can order them they both snapped on me so the whole things shaking gotta get fixed asap.

 

[Norsetreeman]

Yep just have to weld the rooster comb looking part to the discharge chute and the hinge of the flipper to the top of the discharge and you're good to go. And yep, it is Landmark, you can call 989-817-4586 if you have any questions on it!

Hey can you look up this part# for me it's the bracket that holds on the motor cover there's 2 that snapped. Part # D1JJ-16620-A THANKS if you guys can get em I need two I'll order them right up

 

[Trevor Balgavy]

Is there anyway I could get a picture of the brackets you need? I might have some on skeleton out back or something.