Log splitting job request pictures

tomstrees

Participating member
A lady over in NY state responded to an online job service listing. How would you handle this job with the pictures? 891509339_1343632451084553_1837903008151453487_n.webp886415225_1100744412587495_1312751052185239237_n (1).webp
 
I went out to the job today, an hour or so away. I don't have a smart phone. There is no way to assess a job without in person inspection. The directions were squirrely; I wrote down my online directions befor going there. I ended up getting lost, calling the customer who was at work and finally finding the property. I split as much wood as I could with a standard 27 ton splitter, white oak. I worked noon to 5pm. The tree guy she hired had pulled out brush and left a lot of logs helter skelter to split. Her son did some splitting, covering it all with a thick tarp instead of exposing the wood to sun exposure. I work @$75/hour and usually try to get some travel or gas expenses covered.
 
Last edited:
  • Like
Reactions: ATH
Hourly rate.

Explain that different people need and want wood processed differently.


I've had 10" lengths up to 22", 8" to 40" diameter rounds to split For personal stoves. Each person needs something different from different material.
 
Hourly rate.

Explain that different people need and want wood processed differently.


I've had 10" lengths up to 22", 8" to 40" diameter rounds to split For personal stoves. Each person needs something different from different material.
I had a job like that last week. The guy had sent me pictures, once again impossible to judge the scope of a project from some pictures. Then he said that his stove had a maximum length of 18". I cut in half what I could. He also has a fireplace. I've never had a woodstove with severe limitations.
 
I'd recommend splitting a bit smaller than usual in order for it to have a fighting chance to actually dry, even given two years time, because it's oak, Normal size just won't dry right. Suggest it to the customer IMO. Do you have to stack it on site too? Discuss off ground and predominant cross wind too. Sunlight helps but not nearly as much as steady airflow through the pile. Ie don't stack up against a wall. Was it a "ripe" oak smell with the rot? ;)
 
I split most of the wood yesterday, keeping in mind that it is dense white oak as "Bart" said, ripe smell. The fact that the logs were not stacked, with large stump pieces still on the stump and around it told me that the lady is on a tight budget or just tight. She was hoping to get all the wood split and stacked up for $300, which is ridiculous. Her son had split some, probably rented a splitter and then covered it with a thick tarp. I told her that the wood needs to be left uncovered with sun exposure. The Amish do the "whirlpool" stack for maximum drying.

In my town a lot of the wealthier professionals who don't burn wood have come in, so getting splitting jobs has become harder. I do these jobs to try to get more upper body exercise, lose weight etc.. I've seen too many guys doing hard physical work get hurt, it's just not worth it if you're taking unnecessary risks. So I don't work when I'm not feeling up to it.
 
I'd charge more, or have X setup-charge on top of hourly. 2 hr job is $150 but when does the clock start and stop and then get stuck in traffic or breakdown etc. 2 day job has the benefit of one setup and less communication/billing so the client also gets an efficiency boost. Minimum charge seems to be universally accepted and gets based on your overhead/headache.

Fuel is super expensive, parts/service and replacement costs factor into rates. My equipment replacement costs have gone up 8%/yr since 2019, insurance has gone up, vehicles have gone up, mechanics are almost double. How about health insurance and PT visits? You get my point!!

To your other thread, having healthy finances will reduce stress and mitigate pushing through injuries/weather which promotes healthy living/lifestyle. Stress is such a huge factor these days and especially affects eating/drinking habits too.
 
Generally I'd agree, the question is what the market will bear? I'm service-minded, obviously don't want to be doing charity to people much better off than myself, I've done that before.

Last week I had another long distance job that I initially declined. We re-connected on FB and I went out on faith. It paid off as I made $500 on the job all in; 4-5 hrs. work the rest travel with Subaru Forester.

The potential problems are equipment breakdown, if the bearing fails or something else fails.
 
I've read in the past where folks have said firewood is not a good money proposition. I'd shrink the job to maybe exclude stacking and cleanup, try to pass it off to the son. At least you can reduce the $-time conflict between you and the customer and deflect it to her loyal son. Wear and tear will bite your splitter sooner or later and cost $. Try to cost that in. Keep up/cost in your fluids maintenance as that's the best protection I can think of for the mechanicals.

I chopped up some p_ss elm a couple days ago. Sorry, that's what brought on the oak smell memory/comment. Hope it wasn't too bad.
 
I don't usually do stacking, if they want it I figure $30 an hour as a courtesy. Most tree guys don't do log splitting for customers because they are always thinking in terms of what the cash value of a cord is--and if you charge $200 to split a cord they're thinking they could buy dry wood by the cord for a little more not thinking about the reality that they can't get rid of the wood usually.

On this job they have quite a few cords of wood once the wood is split. The pictures looked like 1 1/2 cords to me or so. The reality is probably 4-5 if everything was split up. I indicated 4 hours minimum. I ended up doing 5 hours got paid for the machine time, I did not press it as the lady was hoping to get everything split up and stacked. I called her when I was 1/3 done to let her know what we were dealing with and she was ok with that.
 
I don't usually do stacking, if they want it I figure $30 an hour as a courtesy. Most tree guys don't do log splitting for customers because they are always thinking in terms of what the cash value of a cord is--and if you charge $200 to split a cord they're thinking they could buy dry wood by the cord for a little more not thinking about the reality that they can't get rid of the wood usually.

On this job they have quite a few cords of wood once the wood is split. The pictures looked like 1 1/2 cords to me or so. The reality is probably 4-5 if everything was split up. I indicated 4 hours minimum. I ended up doing 5 hours got paid for the machine time, I did not press it as the lady was hoping to get everything split up and stacked. I called her when I was 1/3 done to let her know what we were dealing with and she was ok with that.
$30 an hour to stack firewood seems terribly cheap to me, it doesn't cost you any less to be there if you are stacking versus splitting, you still have to pay for the machine, so you should charge the same hourly rate.

Tree services in your area must be different from here, we do not cut or split firewood, we sell it by the triaxle log truck, and we can't keep it in our yard. It goes too fast. We have one customer right now looking for at least a load or two a week. That's 8 to 10 cords per load typically, and we sell a load of firewood logs for about what you are charging to split that much wood.
 
Possibly from TB, I heard people are willing to pay more for something they can't do themselves.



You can move big rounds--higher- dollar laborer for harder work, something they can't do themselves.

You provide and operate a machines-- highest dollar work, they can't do.

You're moving/ stacking split wood--lowest dollar work...a kid can do it.
 
Possibly from TB, I heard people are willing to pay more for something they can't do themselves.

...
I remember hearing John Ball say:
People will pay for something they can do, but don't want to
People will pay more for something the think they could do, but don't have the equipment to do (this is what you are saying, I think)
People will pay the most for something they don't know how to do.
 
$30 an hour to stack firewood seems terribly cheap to me, it doesn't cost you any less to be there if you are stacking versus splitting, you still have to pay for the machine, so you should charge the same hourly rate.
...
agree - 100%. Sure, the splitter is worth something, but not $45 per hour.

I'd suggest stacking should be at least splitting cost-cost of splitter. So if he's charging $75 per hour to split (low, IMHO, but he knows his market), probably needs to be $60-65 to do anything else on site.

Gotta cover expenses if you are going to run a business. $30 per hour doesn't do that for a business.

I won't talk hourly rates to clients. Too many will compare it to what they make. $75 is a decent professional salary, not a "laborer" salary so it sounds outrageous. "I put screws in widgets all day and have seniority in the union and only make $45.37 per hour". Not realizing how much it costs to employ somebody for that salary.
 
I remember hearing John Ball say:
People will pay for something they can do, but don't want to
People will pay more for something the think they could do, but don't have the equipment to do (this is what you are saying, I think)
People will pay the most for something they don't know how to do.
Yes, that's it! Dr. John Ball at an ISA conference.
 
Someone should find that stick cartoon man who does the valuable walnut tree, but the pricing vid IIRC or it's in the walnut vid.

derail for humour's sake, business costing 101:
 
Last edited:
I had another log spllitting request an hour away that I contracted on. Again, it's impossible to judge a job based on pictures. This looked smaller than the 4-5 hours it took. Everyone should keep in mind "safety first" as thousands of log splitter injuries occur yearly in the US, I know of two in this town.
835355624_1909878353752547_7893252683598938629_n.webp
 

New threads New posts

Back
Top Bottom