Jet Adjustment Video?

[Collins_Tree]

Anyone have a video link on how to adjust a big saw(044+)?
It would be nice to be able to hear what a proper 2 cycle "stutter" sounds like at the the top end along with how to properly adjust the low speed jet.

 

[Colin]

Sorry to be no help but madsens used to have a web site that also had sound files! Their website has been down for yonks! WTF gives, who knows?

Tacho's are darn cheap over there just get one of them.

 

[GASoline71]

Here is the web archive of Madsen's site:

http://web.archive.org/web/20051018211636/www.madsens1.com/default.htm

Here is the link to the carb tuning:

http://web.archive.org/web/20051018212959/www.madsens1.com/sawtune.htm

There is no video, but there are some .wav files for you to hear. You can really hear when the saw "4-cycles" in the sound file.

Follow this step by step and your saw will be tuned perfectly.

Remember this is for saws without the limiter caps on them. If they have the caps, you will have to pull the caps to tune, and then replace them when finished.

Gary