Feds to release new crane rules

TMW

Location
OH
http://ap.google.com/article/ALeqM5jSABRwPks32YHtwWcoDYmIx5cS5AD9399BS80

By DEVLIN BARRETT – 1 day ago

WASHINGTON (AP) — The federal government is to announce it will require crane operators nationwide to pass a certification test in its first update of crane regulations in nearly four decades, officials said Thursday.

The U.S. Department of Labor was to release draft regulations for the first time since 1971, after several deadly crane accidents this year, including two that killed nine people in New York City. A crane collapse in Houston killed four people in July.

The draft rules will require crane operators to pass written and practical tests in all 50 states and also will require the operators to undergo more training.

The new standards aim to toughen requirements on inspecting ground conditions, the assembly and disassembly of cranes, the operation of cranes near power lines, the certification and training of crane operators, the use of safety devices and inspections of cranes.

Crane operators would have four options under the new requirements: certification through an accredited third-party testing organization, qualification through an audited employer testing program, a U.S. military-issued qualification, or qualification by a state or local licensing authority.

Just 15 states and six cities — including New York state and New York City — require the tests. Texas, which led the nation in deadly crane accidents for the past three years, does not.

The proposed rule "comprehensively addresses the hazards associated with the uses of cranes and derricks in construction, including tower cranes," said Edwin G. Foulke Jr., the assistant secretary of labor for Occupational Safety and Health.

"This draft rule will both protect construction employees and help prevent crane accidents by updating existing protections and requiring crane operators to be trained in the use of construction cranes."

The rules will cover a vast majority of the 96,000 cranes across the country, including 2,000 tower cranes, officials said. Another new proposal would require crane operators to use equipment or a spotter to check for power lines and assess the terrain where they will be working before operating a crane.

Industry officials had called for months for uniform standards for operating cranes and had pushed the government to move quicker to update the standards. A final approval process will likely take more than a year.
 
  Oh boy........anytime the Feds get involve, watch out! One big question will be: by "crane", do they mean the giant tower cranes used in high rise construction and /or the 300 ton and larger crawler types? And, the big question, do they in addition mean the guy with a 10 ton boom truck with no employees who sets trusses on homes? This reminds me of the FAA and the airlines, and what filters down to the guy who flies a single or 2 place homebuilt, we (recreational pilots and small crane operators) cannot expect to meet the same regs as a multi billion dollar industry, and hopefully any proposed legislation will have some kind os cutoff point as per size.  I would not mind if Idaho had some kind of required testing, (they don't), but the Feds are a whole different deal.
 
They mean all cranes with a winch line. Mobile cranes boom trucks tower and lattice etc. Does not include knucklebooms however.
 

New threads New posts

Back
Top Bottom