Search results

  1. M

    Perkins T3, 1104D, 142HP

    I ran the 4.4 liter Perkins engines extensively for a few years in the 2005 to 2010ish years. These were in ASV RC 100 machines with mulchers on them. Hands down these were solid engines that tolerated abuse. During that time I had one that had the injector pump fail due to water contamination...
  2. M

    Looking for contract climber in Kissimmee Florida (just south of Orlando/Disney area)

    I am looking for a contract climber to work on an as needed basis. Must have experience, references, COI, and your own climbing gear. I have an ongoing multi-year contract for removals. Not enough work on contract for a full-time position at this time. I can be contacted at 863-528-3213.
  3. M

    Morbark 2400 Hurricane with grapple. Looking for help!

    I have no experience with this machine but I have considerable experience with hydraulics. If you post or email me a set of schematics for the hydraulic system I may be able to review them and tell you where to check. Do you have pressure gauges and a flow meter?
  4. M

    Best power pole saw that isnt a Stihl?

    For the guys running the electrics. What kind of run times do you get out of them? Can they handle sustained production cutting on 3 - 9 inch wood?
  5. M

    Best power pole saw that isnt a Stihl?

    I forgot to mention that my guys like the rigidity of the pole on the 133 better and the Echo doesn't flop around either the way my older 131 models did. The echo has much better fuel and oil caps the my Stihl saws. You probably already know that the Stihl caps collect dirt that is not easily...
  6. M

    Draining and cleaning fuel tanks

    If it is just water drain it. You may want to consider swapping to a desiccant filter breather to keep moisture out. Many companies make these but you will not find them locally google it.
  7. M

    Best power pole saw that isnt a Stihl?

    Echo has a two year commercial warranty and 5 years homeowner warranty. Echo offers a 4 foot extension for there telescoping pole saws allowing cuts at 20 ft and I have an echo for this reason. This combination is invaluable for the municipal ROW work I do without a bucket . Stihl only offers...
  8. M

    Biggest Bid Projection Of My Career

    I agree with lumber jack. Job is probably already gone as Tylor has not posted back in a few days. I agree this is likely a job for a land clearing or logging company probably. For a "tree service" type company to be cost effective would be difficult. Even utilizing a ctl and all the...
  9. M

    Biggest Bid Projection Of My Career

    I wouldn't rule out a chopper if you must remove from slopes for processing without a site visit. I know a HVAC contractor that sets the refrigeration and A/C units for Publix supermarkets with a chopper because is significantly more efficient then a crane. Though you have to have the crew to...
  10. M

    Biggest Bid Projection Of My Career

    Your project is totally doable if you have the right equipment and very good operators. I do projects in similar areas for road right of ways. Having the right tools and knowledge is were it is at. For a project like this if you have the right equipment you while get it efficiently however the...
  11. M

    Hurricanes

    I am from Florida as far as I am aware the state has no licensing requirments for tree services land clearing etc. Cities or counties may require something though. However for anything construction or roofing related licensing is required. The state is well aware of shady companies coming in...
  12. M

    Huge chip truck

    I believe southco made one and only one huge chip truck a few years ago. There was a picture of it on there web site for some time was gone last I looked. It was on a International tandem chassis painted dark green. I think it was around 35 ft long. I remember calculating the capacity at about...
  13. M

    Ht 131 Back fire broblem?

    That's a good point. Will have to check that
  14. M

    Ht 131 Back fire broblem?

    Will check put problem started before saw was ever disassembled since new. The fuel is a good point but both by Fs 550 and 555fx have been using from the same tank with no issue. Thanks
  15. M

    Ht 131 Back fire broblem?

    I have an Ht 131 that misfires under load (Nasty popping noise). Tried everything cant seem to fix it. Will only do it under load. Machine is 3 years old. Not used that much just changed sprocket for first time. Replaced Carb(had a small gasket leak), Removed muffler screen (No carbon build up...
  16. M

    Ht 131 Back fire broblem?

    I have an Ht 131 that misfires under load (Nasty popping noise). Tried everything cant seem to fix it. Will only do it under load. Machine is 3 years old. Not used that much just changed sprocket for first time. Replaced Carb(had a small gasket leak), Removed muffler screen (No carbon build up...
  17. M

    Ht 131 Back fire broblem?

    I have an Ht 131 that misfires under load (Nasty popping noise). Tried everything cant seem to fix it. Will only do it under load. Machine is 3 years old. Not used that much just changed sprocket for first time. Replaced Carb(had a small gasket leak), Removed muffler screen (No carbon build up...
  18. M

    Best sprays for right-of-way?

    What is the nature of your weeds grass or broadleaf? Do you desire pre emergent or post emergent control? If broadleaf do they have established round wood?
  19. M

    Fertilizing, not all it's cracked up to be?

    I don't post here often and this is my first time posting in this section so I will give you my back ground. I hold a bachelors in Citrus production, minor in horticulture production, and business management. I am also a certified crop advisor with a South East certification. I am also...
  20. M

    Stihl Duro Saw (carbide tip) Chains ?

    "Southsoundtree" that is the stuff. I should clarify since this thread is about carbide chain that I have never tried Kool-Grind on the diamond wheels needed to sharpen carbide. I don't use the grinder that much. Mainly for damaged chains or when I have a new guy that hand filed a chain wrong to...

New threads New posts

Back
Top Bottom