Search results

  1. chiselbit

    Today....

    I have a Borntrager, it’s the 53 ton or 63? Great jack. And they are great people, we had an incident where the jack decided to turn into a bowling ball and rolled down the very steep hill and then crashed into a tree bending the pump assembly and knocking the pad off. We had packed in over a...
  2. chiselbit

    Today....

    Aha. That’s probably why my self tending plastic piece is broken. We use 3/4” line a lot.
  3. chiselbit

    Clearing house for owner/operators

    There are people/companies that specialize in that crap. I pay a nice lady to keep me up to date on everything.
  4. chiselbit

    Today....

    Didn’t work on this, just a cool,old Blue Oak at today’s job site
  5. chiselbit

    Avant grapple (hydraulic swivel vs free turning)

    Guess I should clarify: I have zero experience with Avant, my recommendation was based off my experience with other machines and aimed at just power vs no power. Good info @DRBetz
  6. chiselbit

    Avant grapple (hydraulic swivel vs free turning)

    I’d recommend the power. I know a lot of guys don’t feel the need and have gotten good at bumping loads into the right position but why limit yourself? With a powered rotation you can make brush piles dance into the chipper. Sort through a knee deep pile of pine limbs at the base of the tree and...
  7. chiselbit

    FTC Klik N'Ka spurs

    I bought some of those wolf claws too, they weren’t real comfy. And the back strap got in the way occasionally when doing oak removals or anything that wasn’t just a straight up pole.
  8. chiselbit

    Unless

    Unless first we dream
  9. chiselbit

    Today....

    Speaking of lanyards, what kind of lanyard is that Scott?
  10. chiselbit

    I had to comment!

    Certainly better than the alternative.
  11. chiselbit

    MS200t rebuild kit and service manual

    HL Supply probably has all the parts too, not sure if they have oem though.
  12. chiselbit

    Mini-skid pulling to one side in reverse

    I’ve had pebbles fall into the linkage on my bobcat excavator, couldn’t turn very far in one direction.
  13. chiselbit

    Today....

    Cool pics!
  14. chiselbit

    Mobile app for creating invoices and proposals?

    Thanks. I’ll check it out.
  15. chiselbit

    Mobile app for creating invoices and proposals?

    Let me start this with the disclaimer: I am not good with computers. I can barely navigate this website and you guys have seen me struggle to post pictures. So with that said I am looking for a way to create invoices and proposals with my iPhone. I’m not too interested in accepting credit card...
  16. chiselbit

    ChipBox ?s and/or suggestions.

    I think @Merle Nelson has been researching aluminum chip boxes, he might have some insight
  17. chiselbit

    Recommended saw for spar work

    Typo. I meant I’m not really into building saws, I just run them. And the 3/8 small spline sprocket seems to be working just fine on the 550, I put an old solid 24” bar on it while I wait for the lightweight bar to arrive, spins fine. Tomorrow we start a big pine(s) removal project, I’ll put it...
  18. chiselbit

    Recommended saw for spar work

    I just got a 3/8 sprocket with the small spline. Haven’t tried it yet but I’m thinking it will be all I need. Now should be able to run the 24” .050 bar. I don’t think anybody makes a .325 bar in the 24” length. And maybe my 400’s are 3/4 wrap? I’ll have to look Randy evans built the saws and...
  19. chiselbit

    Recommended saw for spar work

    Tsumura
  20. chiselbit

    Recommended saw for spar work

    I’m in the middle of doing just that, putting a lightweight 24” on my ported 550. Should have everything by middle of next week

New threads New posts

Back
Top Bottom